Brochure

Page 2 of 5
CLIP LED lights
when signal
distortion
occurs
FREQUENCY
control
adjusts center
frequency of the
feedback  lter
Class-D Ampli er Technology
Our revolutionary Class-D ampli er
technology enables us to make  oor
monitors that weigh about the same
as their passive cousins, even with a
built-in 300-Watt ampli er! Class-D amps
are super-e cient little beauties that
don’t generate as much heat as their
conventional counterparts, so they
don’t need massive heat sinks to keep
them cool. We combine these powerful
ampli ers with state-of-the-art
switch-mode power supplies for noise-free
audio, superior transient response and
extremely low power consumption.
Custom-Engineered Transducers
While some manufacturers are content
with putting o -the-shelf transducers in
their boxes, we custom-design and build
ours from scratch. We do this because
the transducers (woofers and tweeters)
are the part of the system you actually
hear, and we want them to sound great.
Our loudspeakers deliver truly impressive
performance at levels that easily cut
through stage clutter, even in the most
demanding situations. We make our own
because they have to be right—right for
each application, and most importantly—
right for you!
Speaking of Control…
The F1320D doesn’t just sound
great, it gives you instant control of
your monitor, even mid-performance—
something passive monitors simply
cannot deliver! Need more volume?
Turn the LEVEL dial until the desired
volume is reached, getting too much bass
or treble? Just reach down and tweak the
3-band EQ (HIGH, MID, LOW) to tailor a
rich, exciting sound. We’ve even provided
the  rst line of defense against feedback,
a dedicated FREQUENCY dial you can
adjust to eliminate troublesome mic
squeals. Total control is always right at
your  ngertips with the EUROLIVE F1320D.
Instant PA System
You can set up an instant sound
system with just one F1320D and a
microphone or MP3 player. Thanks to
the built-in preamp, you can connect a
dynamic mic directly to the F1320D and
raise and lower the volume with the Level
control. Fast and easy to set up, you can
be ready for “show-time” at a moment’s
notice. There’s even a built-in 35-mm
socket, so you can mount the F1320D on
a standard speaker pole for use as a PA
system. And if you need more coverage,
chain together as many F1320Ds as you’d
like via the convenient XLR or ¼ " TRS LINK
OUTPUT connector.
POWER LED
LEVEL control
sets the volume
of LINE or
MIC signal
3-band EQ
Feedback Filter
switch with LED
¼" LINK
OUTPUT
sends signal to
another F1220A
XLR LINK
OUTPUT sends
signal to another
F1220A
¼" MIC/LINE
input
XLR MIC/
LINE input
Continued on next page
EUROLIVE
F1320
D