User manual

13 F-CONTROL AUDIO FCA202 User Manual
behringer.com
Use the [5] DC IN socket to connect the mains adapter
provided. For further information, please carefully read
through Chapter 2.4.
The [6] LOCK port in combination with a suitable security
lock from Kensington offers you a very good way to
protect your equipment against theft. For further
information, visit kensington.com.
Make the connection to your computer using one of [7]
the two 6-pin FIREWIRE sockets. You can run other
FireWire devices such as hard drives, from the second
socket. This means that you always have a free FireWire
port available, even if your computer has only one
FireWire socket.
You can connect balanced or unbalanced audio cables [8]
with ¼" jack plugs to the BAL/UNBAL OUT sockets.
You can connect unbalanced audio cables with ¼" TS [9]
jack plugs to the UNBAL IN sockets.
FCA202 CONTROL PANEL3.3
In addition to the device drivers on the PC, a CONTROL PANEL
is installed during the installation process. If you use an ASIO
driver, use this software to configure the FCA202. You’ll find
more information on the drivers in Chapter 4.1.
In Windows systems, the panel can be accessed from the
“Start Menu”. In the “Start Menu”, choose “Control Panel”,
and then look for the entry “FCA202”. Alternatively, you may
find that the audio software you use has a dialog for opening
up the panel. For more information, please refer to the
manual for your audio application.
With Mac OS X, you first have to select the FCA202 in
“System Settings” under the entry “sound”. You can then
directly configure the card from the audio application
that you use. For more information, please refer to the
appropriate software documentation.