User manual

12 F-CONTROL AUDIO FCA202 User Manual
behringer.com
Operating Elements 3.
and Connections
Front panel3.1
[1] [3]
[4][2]
Fig. 3.1: Front panel FCA202
You can connect standard commercial headphones [1]
fitted with a ¼" TRS jack plug to the socket.
Use the [2] LEVEL control to adjust the headphone volume.
Turn the control fully to the left before you connect the
headphones. This helps you avoid the damage that is
caused by high volume settings.
The [3] POWER LED indicates that the equipment is
ready to operate. It lights up as soon as the FCA202 is
provided with power from the mains adapter or via the
FireWire socket.
The [4] FW LED lights up as soon as the FCA202 is correctly
connected by a FireWire cable to a computer that is
in operation. If the LED does not light up, check the
FireWire connection to the computer. You can find
more information on hardware and driver installation
in Chapter 2.
Rear panel3.2
[5] [6] [7] [8] [9]
Fig. 3.2 back of the FCA202