Quick Start Guide

16 EURORACK GO Quick Start Guide 17
Specications
Connectivity
Rear panel
DC Power input
Power switch (toggle)
Power Requirements
External power adaptor (use only the
supplied adapter)
13 VDC, 5A
Power consumption 65 W maximum
PCB Connectors
Quantity 20, box header, straight, 16 pin, 2 rows, pitch 2.54 mm
Quantity 12, box header, angled 90 degrees, 16 pin, 2 rows,
pitch 2.54 mm
Power bus outputs and pin outs
+5 VDC @1 A ( All zone total), pins 11, 12
-12VDC @ 1 A ( All zone total), pins 1, 2
+12 VDC @ 1 A ( Section A total), pins 9, 10
+12 VDC @ 1 A ( Section B total), pins 9, 10
+12 VDC @ 1 A ( Section C total), pins 9, 10
Other bus connections and pin outs
CV, pins 13, 14
Gate, pins 15, 16
Ground, pins 3, 4, 5, 6, 7, 8
Environmental
Operating temperature range 5°C – 40°C (41°F – 104°F)
Environment Dry, indoor use only
Physical
Dimensions (H x W x D) (Flat with tilt-
stand stowed)
112 x 723 x 311 mm (4.4 x 28.5 x 12.2")
Module width 2 bays of 140 HP each (fully useable width)
Maximum depth of module that
can be inserted
40 mm (1.57") - 62 mm (2.44")
Weight 3.9 kg (8.6 lbs)
Accessories
Included power adapter
EURORACK GO Dimensions
723.5 mm [28.5"]
712.2 mm [28.0"]
62 mm [2.44"] 62 mm [2.44"]57 mm [2.24"] 57 mm [2.24"]
47 mm [1.85"]
74.4 mm [2.9"]
112.8 mm [4.4"]
311.4 mm [12.3"]
CAUTION:
Maximum depth
of module that
can be inserted
anywhere in the
rear section is
40 mm [1.57"]
CAUTION:
Maximum depth of
module that can
be inserted in the
front section varies
according to the
location as shown
Maximum Depth of Modules that can be inserted