User manual

7
EUROLIVE B312A/B315A
5. Specifications
4. Installation
Both audio inputs of the BEHRINGER B312A/B315A and the LINK
OUTPUT connector are fully balanced. To maximize interference
compensation, try to establish balanced connections to other
equipment, whenever possible.
Fig. 4.1: 1/4" TRS connector
Fig. 4.2: XLR connector
 Make sure that only competent people install your
B312A/B315A. They must be sufficiently earthed
during and after the installation process. Otherwise,
electrostatic discharges may negatively affect the
operating characteristics of your equipment.
5. Specifications
OUTPUT POWER
Low-frequency range
RMS @ 1% THD 200 W @ 8 Ω
Peak power 300 W @ 8 Ω
High-frequency range
RMS @ 1% THD 50 W @ 8 Ω
Peak power 80 W @ 8 Ω
INPUT
XLR connector (servo-balanced)
Sensitivity -40 to +4 dBu
Input impedance 20 kΩ
¼" jack (servo-balanced)
Sensitivity -40 to +4 dBu
Input impedance 20 kΩ
LINK OUTPUT
XLR connector
LOUDSPEAKER SYSTEM DATA
B312A
Frequency range 65 Hz to 20 kHz
Crossover frequency 2.4 kHz (12 dB)
Maximum sound
pressure level 125 dB @ 1 m
Limiter optical
Dynamic Equalizer Processor-controlled
B315A
Frequency range 55 Hz to 20 kHz
Crossover frequency 1.9 kHz (12 dB)
Maximum sound
pressure level 126 dB @ 1 m
Limiter optical
Dynamic Equalizer Processor-controlled
EQUALIZER
HIGH 12 kHz / ±15 dB
LOW 80 Hz / ±15 dB
POWER SUPPLY
Power consumption max. 450 W
Mains voltage / Fuse
100 - 120 V~ (50/60 Hz) T 5.0 A H 250 V
220 - 240 V~ (50/60 Hz) T 2.5 A H 250 V
Mains connector Standard IEC receptacle
PHYSICAL/WEIGHT
B312A
Dimensions (H x W x D) approx. 25.9 " x 15.5 " x 15.1 "
( 658 mm x 394 mm x 384 mm)
Weight approx. 53.4 lbs (24.2 kg)
B315A
Dimensions (H x W x D) approx. 28.8 " x 18.5 " x 16.7 "
(732 mm x 470 mm x 424 mm)
Weight approx. 61.8 lbs (28.0 kg)
BEHRINGER is constantly striving to maintain the highest professional standards. As a
result of these efforts, modifications may be made from time to time to existing products
without prior notice. Specifications and appearance may differ from those listed or illustrated.