User Manual EUROLIVE B1220DSP Digital Processor-Controlled 600-Watt 12" PA Speaker System with Integrated Mixer
EUROLIVE B1220DSP User Manual Table of Contents Thank you........................................................................ 2 Important Safety Instructions....................................... 3 Legal Disclaimer.............................................................. 3 Limited warranty............................................................. 3 1. Introduction................................................................ 4 1.1 Before you get started....................................
EUROLIVE B1220DSP User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
EUROLIVE B1220DSP User Manual 1. Introduction ◊ Please read this manual to familiarize yourself with the control elements of the unit and its functions. After you have carefully read this manual, keep it for future reference. 2. Control Elements and Connections (2) (7) (10) (8) (9) (3) (4) 1.1 Before you get started 1.1.1 Shipment Your B1220DSP was carefully packed at the assembly plant to assure secure transport.
EUROLIVE B1220DSP User Manual The B1220DSP is equipped with a 2-band tone control. Each band allows you to apply a maximum boost/cut of 15 dB, in its center position the equalizer is set to neutral. (7) Use the EQ HIGH control to cut or boost the treble range by 15 dB. The cut-off frequency is 12 kHz. (8) Use the EQ LOW control to cut or boost the bass range by 15 dB. The cut-off frequency is 100 Hz. (9) The B1220DSP features a high-pass filter with a slope of 24 dB/oct.
EUROLIVE B1220DSP User Manual ◊ Never place a microphone directly in front of the loudspeaker owing to danger of feedback! When operating the B1220DSP make sure that you always stay behind the loudspeaker to avoid feedback. EUROLIVE B1220DSP (optional) EUROLIVE B1220DSP Instead of a mixing console, you can also connect a stereo signal source, e.g. a CD player. In this case, one B1220DSP is connected to each of the outputs of the signal source.
EUROLIVE B1220DSP User Manual 4.3 Other uses Monitoring: When used as a monitor, the B1220DSP receives its audio signal from the monitor or aux output of the mixing console. If additional B1220DSPs are to be used, you can loop the audio signal from the first speaker to the next B1220DSP using the line output. The sound and volume of each B1220DSP can be adjusted with their own operating elements (3) (LEVEL), (7) (EQ HIGH) and (8) (EQ LOW).
EUROLIVE B1220DSP User Manual Power Supply Mains Voltage/Fuses 100 V~, 50/60 Hz T 6,3 A H 250 V 120 V~, 60 Hz T 6,3 A H 250 V 220 V~, 50 Hz T 4,0 A H 250 V 230 V~, 50 Hz T 4,0 A H 250 V Power consumption max. 650 W Mains connector Standard IEC receptacle Dimensions/Weight Dimensions (W x H x D) approx. 397 x 638 x 406 mm approx. (15.5 x 25.1 x 16") Weight approx. 31.3 kg approx. (68 lbs.) BEHRINGER is constantly striving to maintain the highest professional standards.
EUROLIVE B1220DSP User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION EUROLIVE B1220DSP Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone Number: +1 425 672 0816 EUROLIVE B1220DSP complies with the FCC rules as mentioned in the following paragraph: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
We Hear You
