Specification Sheet

3
Ultra-Compact 100-Watt, 2-Way, 8 Ω Loudspeaker System and 70.7 V / 100 V Loudspeaker System
CL106/CL106T
Summary description:Theloudspeakershallbeaprofessional2-wayxed-installationloudspeakersysteminasteel-braced
plywoodenclosureusingabypassableinternalcrossovernetworkwitha6"/150mmlow-frequencyconetransduceranda
waveguide-mounted1"/25mmhigh-frequencydomedriver.
Drivers:Theloudspeakersystemshallusetwotransducers:
• Low-frequencydrivershallbea6"/150mmdirect-radiatingconetransducer
• High-frequencydrivershallbea1"/25mmphenolicdometransducermountedonarotatable90°x70°waveguide
constructedofpolypropylene
Enclosure:Theloudspeakersystemshallbehousedinanenclosureconstructedoflaminatedbirchplywoodthatisinternally
bracedwithsteel.Theenclosureshallbenishedwithdurable,scu-freeblackorwhitepaint.Thefrontoftheenclosureshall
beprotectedwithaperforatedgrilleofpowder-coatedstructuralsteelbehindfabric-wrappedacousticallytransparentfoam.
Thebackoftheenclosureshallhavearecessedsteelinputplateforconnectors.
Rigging and mounting:Theexterioroftheenclosureshallbettedwith14M6threadedriggingpoints.Therearofthe
enclosureshallhave4M6threadedinsertsforOmniMount™30series.Theenclosureshallprovideattachmentpointsforan
optionalyokebracket.
I/O and connectors:Theloudspeakershallhavethefollowingconnectors:
• OneNL4connector,wiredinparallelasafull-rangeinputtothepassivecrossover(CL106)
• One4-positionterminalstripwithcaptivewireclampsandremovableplasticcover,withINterminalswiredinparallelto
OUTterminalsandtotheNL4connectors(CL106)
• One5-positionterminalstripwithcaptivewireclampsandremovableplasticcover,with70Vand100Vterminalswired
totheprimarysideofthematchingtransformer(CL106T)
Performance criteria:Theloudspeakersystemshallmeetthefollowingperformancecriteria:
• Nominalimpedanceshallbe8ΩformodelsCL106/CL106-WH
• CL106T/CL106T-WHTransformertapsshallbe12.5W,25W,50W,100W(70.7V),25W,50W,100W(100V)
• Sensitivity(1W/1mpassive)shallbe90dB
• Usablefrequencyrange(-10dB)shallbe62Hz-20kHz
• Frequencyresponse(±3dB)shallbe69Hz-15kHz
• Powerhandling(IEC268-5,passive)shallbe100WRMS@28.3V(CL106)/100WRMS(CL106T)
• Nominaldispersionshallbe90°x70°(axisdependentonhornorientation)
• MaximumSPL(1m,passive)shallbe110dBcontinuousand116dBpeak
Dimensions and weight:Theloudspeakersystemshallhavethefollowingcharacteristics:
• Heightshallbe17.7"/450mm
• Widthshallbe10.2"/260mm
• Depthshallbe11.3"/286mm
NetWeightforCL106shallbenomorethan20.7lbs/9.4kg
NetWeightforCL106Tshallbenomorethan22.3lbs/10.6kg
Model:TheloudspeakershallbetheBEHRINGEREUROCOMCL106/CL106-WH/CL106T/CL106T-WH.
Architect’s and Engineer’s Specications