Quick Start Guide

Specications
22 23Quick Start GuideEUROCOM CL200/CL200T/CL200S/CL100/CL100T/CL100S
CL100 Series Models CL108 CL108T CL106 CL106T
Frequency range (-10 dB) 65 Hz – 20 kHz 100 Hz – 20 kHz
Frequency response (+/-3 dB) 80 Hz – 15 kHz 115 Hz – 15 kHz
Nominal dispersion 90º H x 70º V
Directivity factor (Q) 7.5
Directivity factor (DI) 8.8 dB
Sensitivity (1 W @ 1 m passive,
125 Hz – 10 kHz)
91 dB 90 dB
Crossover modes Passive Transformer, passive Passive Transformer, passive
Crossover frequency 2 kHz 2.5 kHz
Transformer —
70 V: 12.5 W, 25 W, 50 W, 100 W
100 V: 25 W, 50W, 100 W
—
70 V: 12.5 W, 25 W, 50 W, 100 W
100 V: 25 W, 50W, 100 W
Power capacity
(long term, IEC passive)
150 W RMS @ 34.6 V 100 W RMS 100 W RMS @ 28.3 V 100 W RMS
Maximum continuous SPL(passive) 113 dB 111 dB 110 dB
Maximum peak SPL(passive) 119 dB 117 dB 116 dB
Overload protection Full range power limiting to protect drivers andcrossovers
Nominal impedance 8  — 8  —
Low frequency driver 8" @ 150 W 6" @ 120 W
High frequency driver 1" @ 20 W
Enclosure Trapezoidal 15° side angle, laminated birch plywood
Grille Steel
Horn waveguide 90º H x 70º V, rotatable
Rigging points
14 x M6 threaded points 4 x M6 threaded inserts
forOmnimount 30 bolt
14 x M6 threaded points 4 x M6 threaded inserts
forOmnimount 30 bolt
Termination
NL4 and 4-position terminal
strip connection
5-position terminal
stripconnection
NL4 and 4-position terminal
strip connection
5-position terminal
stripconnection
Dimensions (H x W x D)
appr. 19.3 x 10.2 x 11.3"
appr. 490 x 260 x 288 mm
appr. 17.7 x 10.2 x 11.3"
appr. 450 x 260 x 286 mm
Weight appr. 21.8 lbs / 9.9 kg appr. 23.3 lbs / 10.6 kg appr. 20.7 lbs / 9.4 kg appr. 22.4 lbs / 10.2 kg
Included accessories Yoke and bracket
CL200 Series Models CL208 CL208T CL206 CL206T
Frequency range (-10 dB) 65 Hz – 20 kHz 100 Hz – 20 kHz
Frequency response (+/-3 dB) 80 Hz – 15 kHz 115 Hz – 15 kHz
Nominal dispersion 90º H x 70º V
Directivity factor (Q) 7.5
Directivity factor (DI) 8.8 dB
Sensitivity (1 W @ 1 m passive,
125 Hz – 10 kHz)
91 dB 90 dB
Crossover modes Passive Transformer, passive Passive Transformer, passive
Crossover frequency 2.5 kHz 2 kHz
Transformer —
70 V: 25 W, 50 W, 100 W, 200 W
100 V: 50 W, 100W, 200 W
—
70 V: 25 W, 50 W, 100 W, 200 W
100 V: 50 W, 100W, 200 W
Power capacity
(long term, IEC passive)
200 W RMS @ 28.3 V 200 W RMS 200 W RMS @ 28.3 V 200 W RMS
Maximum continuous SPL(passive) 114 dB 113 dB
Maximum peak SPL(passive) 120 dB 119 dB
Overload protection Full range power limiting to protect drivers andcrossovers
Nominal impedance 4  — 4  —
Low frequency driver 2 x 8" @ 150 W 2 x 6" @ 120 W
High frequency driver 1.35" @ 30 W 1" @ 20 W
Enclosure Trapezoidal 15° side angle, laminated birch plywood
Grille Steel
Horn waveguide 90º H x 70º V, rotatable
Rigging points
14 x M6 threaded points 4 x M6 threaded inserts for
Omnimount 30 bolt
14 x M6 threaded points 4 x M6 threaded inserts for
Omnimount 30 bolt
Termination
NL4 and 4-position terminal
strip connection
5-position terminal
stripconnection
NL4 and 4-position terminal
strip connection
5-position terminal
stripconnection
Dimensions (H x W x D)
appr. 28.4 x 10.2 x 11.9"
appr. 720 x 261 x 302 mm
appr. 25 x 10.2 x 11.7"
appr. 635 x 260 x 296 mm
Weight appr. 32.4 lbs / 14.7 kg appr. 35.9 lbs / 16.3 kg appr. 29.5 lbs / 13.4 kg appr. 33.0 lbs / 15.0 kg
Included accessories Yoke and bracket