Specification Sheet

EUROPOWER EP2500
3
Output power
20 Hz - 20 kHz @ 0.1% THD, both channels driven
8 Ω per channel 450 W
4 Ω per channel 650 W
1 kHz @ 0.1% THD, both channels driven
8 Ω per channel 500 W
4 Ω per channel 750 W
2 Ω per channel 1200 W
Bridged Mono
8 Ω, 20 Hz - 20 kHz, 0.1% THD 1300 W
8 Ω, 1 kHz, 0.1% THD 1500 W
4 Ω, 1 kHz, 1% THD 2400 W
Distortion
< 0.02%
Frequency response
at 10 dB below rated output power 20 Hz - 20 kHz, +0/-1 dB
at -3 dB points 5 Hz - 50 kHz
Damping factor
> 300 @ 8 Ω
Noise
unweighted, 20 Hz to 20 kHz -100 dB
Voltage gain
50x (34 dB)
Input sensitivity
V RMS (@ 8 W) 1.23 V (+4.0 dBu)
Input impedance
10 kΩ unbalanced,
20 kΩ balanced
Controls
Front Power switch, gain control
(channels 1 and 2)
Rear DIP switches (10x)
Indicators
POWER green LED
CLIP red LED, 1 per channel
SIGNAL yellow LED, 1 per channel
Connectors
Inputs Balanced XLR and
1/4" TRS connectors
Outputs "Touch-Proof" binding posts and
Neutrik Speakon
Cooling
Continuously variable speed fan,
back-to-front air ow
Amplier protection
Full short circuit, open circuit,
thermal and HF protection
Stable into reactive or
mismatched loads
Load protection
Turn-on/off muting, AC coupling
Output circuit type
Class H complementary linear
output
Power supply
Mains voltage/Breaker
100 - 120 V~, 50/60 Hz 15 A
220 - 230 V~, 50/60 Hz 8 A
Power consumption 2600 W
Mains connector Standard IEC receptacle
Dimensions/Weight
Dimensions (H x W x D) approx. 88 x 482.6 x 402 mm
approx. 3 1/2" x 19" x 15 4/5"
Weight approx. 16.6 kg
approx. 36.6 Ibs
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary
modications are carried out without notice. Thus, the specications and design of the
device may differ from the information given in this publication.
Specications