EP2500 EUROPOWER Specifications 18333-00006
EUROPOWER EP2500 EUROPOWER Power amplifier with 2 x 1200 Watts 2x700 WATTS POWER AMPLIFIER 2x1200 WATTS POWER AMPLIFIER == 2-channel, parallel or bridged mono operating modes for flexible application EP2500 == EP2500: 2 x 1,200 Watts into 2 Ohms; 2,400 Watts into 4 Ohms bridged operation == Independent limiters for each channel offer dependable protection against distortion == Precise signal and clip LED indicators to monitor performance == Selectable low-frequency filters (30 Hz or 50 Hz) remove di
EUROPOWER EP2500 Specifications Output power Power supply 20 Hz - 20 kHz @ 0.1% THD, both channels driven 8 Ω per channel Mains voltage/Breaker 450 W 100 - 120 V~, 50/60 Hz 15 A 4 Ω per channel 650 W 1 kHz @ 0.1% THD, both channels driven 220 - 230 V~, 50/60 Hz 8A 8 Ω per channel 500 W Power consumption 2600 W 4 Ω per channel 750 W Mains connector Standard IEC receptacle 2 Ω per channel Bridged Mono 1200 W 8 Ω, 20 Hz - 20 kHz, 0.1% THD 1300 W 8 Ω, 1 kHz, 0.
EUROPOWER EP2500 Technical specifications and appearance are subject to change without notice. The information contained herein is correct at the time of printing. All trademarks (except BEHRINGER, the BEHRINGER logo, JUST LISTEN and EUROPOWER) mentioned belong to their respective owners, and such use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the trademark owners with BEHRINGER.
