Specs

Page 3 of 6
compressors. This section also features
RCA outputs for recording your set.
The Monitor/Zone Output section gives
you separate stereo ¼ " and XLR monitor
outputs, as well as ¼ " stereo zone outputs,
each with their own dedicated level
controls. This feature gives the DX2000USB
incredible zone mixing versatility, allowing
you to send output signals to a variety of
destinations, such as the lobby, restaurant
or waiting areas, all the while maintaining
total control.
Transforming with Punch and Cut
Transforming is a DJ term used to
describe the chopping up of sound to
create some rather dramatic e ects.
Traditionally this is done by rapidly moving
a crossfader to give a stuttering or “gated”
e ect, either between two music sources,
or one source and silence. Another DJ trick
is to use the channel faders, or channel
on buttons, to chop one music track
over another. These methods are still
valid, but if you’re looking for instant
grati cation, check out our ergonomic
Continued on next page
music’s strongest pulses with a lighting system,
provided your lighting system has “sound-to-
light” capability (e.g. BEHRINGER LC2412 Lighting
Console). The Main Output section o ers balanced
¼" TRS and XLR stereo outputs, as well as ¼ " TRS
Main Insert jacks for connecting to outboard EQ
and dynamics processors, such as limiters and
LIGHT LEVEL
adjusts output
level of mono
LIGHT OUTPUT
ZONE LEVEL
adjusts output
of ZONE
OUTPUTS
FX
RETURN
PHONES
LEVEL
in nium
optical X/Y
CROSSFADER
TRANSFORM MODE
determines whether
PUNCH/CUT buttons
operate in CUT or
PUNCH mode
MAIN/PFL selects
main stereo mix
or PFL mix for
phones
INPUT
button
selects
channel’s
audio source
FX button
routes
channel to
FX SEND and
RETURN loop EQ ON
CD/
PHONO
input
selector
LEVEL METER
displays left
and right MAIN
signal, PFL
signal level
MONITOR
fader adjusts
output of
MONITOR
OUTPUTS
ASSIGN button
assigns active
channel to X
or Y side of
crossfader
CROSSFADER
button routes
signal to
crossfader
CHANNEL
fader adjusts
channel
volume
PFL button
sends
channel to
PFL bus
EQ knobs
LOW CUT
button
removes
unwanted low
frequencies
GAIN
PAN knob
positions
channel in
stereo  eld
TALKOVER
button
CHANNEL
ON
MAIN BOOST
raises the
main mix by
+4 dB
SENSITIVITY
knob adjusts
how loud mic
signal must
be to engage
talkover
TIME knob
adjusts how
quickly the music
volume recovers
after talkover has
been engaged
DAMPING
adjusts music
level reduction
when talkover is
engaged
MAIN DIM
button
reduces the
main mix by
-20 dB
PUNCH/
CUT
buttons
MAIN
faders
BALANCE
adjusts blend
of PFL and
main signals in
headphones
TRACK START button
allows remote control
of commercial
playback decks via
built-in remote jacks
PRO MIXER
DX
2000
USB