Specification Sheet

3
SPECIFICATIONS
ANALOG AUDIO INPUTS
Connections XLR and balanced 1/4" jacks
Type RF-suppressed, servo-balanced input
Impedance 50 kOhm balanced, 25 kOhm unbalanced
Max. Input Level +21 dBu balanced and unbalanced
CMR typ. 40 dB, >55 dB @ 1 kHz
ANALOG AUDIO OUTPUTS
Connections XLR and balanced 1/4" jacks
Type electronically controlled, servo-balanced output amplifier
Impedance 60 Ohm balanced, 30 Ohm unbalanced
Max. Output Level +16 dBu balanced and unbalanced
BYPASS
Type relay controlled hard-bypass
SYSTEM SPECIFICATIONS
Frequency Range 20 Hz to 20 kHz, +/- 0.5 dB
S/N Ratio > 88 dBu, non-weighted, 22 Hz to 22 kHz
THD 0.004 % typ. @ +4 dBu, 1 kHz, unity gain
Crosstalk < -103 dB, 22 Hz to 22 kHz
DIGITAL INPUT (optional)
Type AES / EBU transformer-balanced
Impedance 10 kOhm balanced
Input Level 3 to 10 V (peak to peak)
DIGITAL OUTPUT (optional)
Type AES / EBU transformer-balanced
Impedance 100 Ohm balanced
Output Level 5 V (peak to peak)
MIDI INTERFACE
Type 5-pin DIN socket: In, Out and Thru
DIGITAL PROCESSING
Converters 24-bit sigma-delta
Sampling Rates 48 kHz, 44.1 kHz and 32 kHz (32 kHz only with AES/EBU)
CONTROLS
Process switch to PROCESS mode
Meter switch to METER mode
In/Out inserts the device into the signal path
Setup access to both setup levels
4 Softkeys functions corresponding to the pictogram
4 Cursor Keys modification of parameters and scrolling in menus
DISPLAY
4 Function Switch LEDs indicate the active functions
MIDI LED LED for monitoring the reception of MIDI data
DISPLAY
Type 240 x 64 dot matrix, liquid crystal display (LCD)
Backlight LED array
Contrast adjustable via software