Version 1.
TWEAKALIZER DFX69 IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock.
TWEAKALIZER DFX69 TWEAKALIZER High-End DJ Effects Processor with Real-Time Control DFX69 s Desktop DJ effects machine with 6 simultaneous functions and super-intuitive user interface s Incredible real-time scratch function for any input signal s Super-fast and accurate auto-BPM counter s Virtually inaudible Pitch Transposer to correct track speed adjustments s Breathtaking LFO-controlled effects section including delay and flanger s Awesome filter effects with 3 filter types (low, high and band pas
TWEAKALIZER DFX69 FOREWORD Dear Customer, Welcome to the team of TWEAKALIZER users and thanks for expressing your confidence in BEHRINGER products by purchasing the DFX69. Writing this foreword for you gives me great pleasure, because it represents the culmination of many months of hard work delivered by our engineering team to achieve a very ambitious goal: to design an outstanding DJ effects processor that offers remarkable functions as well as maximum flexibility and performance.
TWEAKALIZER DFX69 1.1.2 Initial operation 1. INTRODUCTION The BEHRINGER TWEAKALIZER DFX69 is a flexible DJ effects processor that gives you an important edge for your mixes and performances. Its unique features let you work in completely new and creative ways. The TWEAKALIZER can be used in many ways and is breeze to operate, allowing you to expand your creativity. Times are changing quickly and you have to stay ahead of the game if you dont want to be left behind.
TWEAKALIZER DFX69 2.
TWEAKALIZER DFX69 The MIX control adjusts the volume ratio between the original signal and the effects signal. When the control is turned all the way to the left, you hear only the original (DRY) signal; turning it all the way to the right you hear only the selected effects (WET) signal. To change the mix ratio of a previously activated effect, ) or DELAY ( ) key. The LED first tap the FLANGER ( of the respective ON switch ( or ) will then blink rapidly.
TWEAKALIZER DFX69 LFO (Low Frequency Oscillator) In this mode, the LFO modulates the cut-off frequency from the lowest to the highest frequency and back to the lowest frequency. The modulation speed can be either adjusted continuously using the ENCODER or incrementally and ). The increments using the BEAT keys (see available via the BEAT keys are always relative values expressed in beats.
+ TWEAKALIZER DFX69 If there is no signal present (or the signal is too weak), the BPM display begins to blink. This also happens when the beat counter cannot accurately analyze the signal. 2.4 Connections Fig. 2.2: The rear panel connections The LINE input is for connection of a line-level signal (e. g. the main outputs of your DJ mixer). + PHONO is intended for connecting a turntable.
TWEAKALIZER DFX69 Fig. 3.2: Direct connection of a turntable to the TWEAKALIZER DFX69 4. INSTALLATION For audio connections, you will need a standard, commercially available RCA cable. For optimal results, always use high-quality cables, adapters and connectors. + 10 Always make sure that only technically qualified people install and operate your TWEAKALIZER.
TWEAKALIZER DFX69 6. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims.
