User Manual

99 DeepMind 12 User Manual
Chorus-D (DIMENSIONAL CHORUS)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1 ON On — OFF ON Allows the e ect to be turned On or O .
2 MOD Mode — M ST Switches the operation between Mono and Stereo modes.
3* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
4 SW1 Sw1 — OFF ON Engages level one intensity (minimum).
5 SW2 Sw2 — OFF ON Engages level two intensity.
6 SW3 Sw3 — OFF ON Engages level three intensity.
7 SW4 Sw4 — OFF ON Engages level four intensity (maximum).
Flanger (STEREO FLANGER)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1* SPD Speed Hz
0.0 Hz
5 Hz Sets the modulation speed. Time synchronised options from 4 to 1/64 bars.
2* WDL WidthL %
0.0% 100%
Determines the amount of modulated delay in the left channel.
3* WDR WidthR % 0.0% 100% Determines the amount of modulated delay in the right channel.
4 DLL DelayL ms 0.5 ms 20.0 ms Sets the total amount of delay for the left channel.
5DLR DelayR ms
0.5 ms 20.0 ms
Sets the total amount of delay for the right channel.
6* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
7* LC LoCut Hz 10.0 Hz 500.0 Hz Allows the low frequencies in the signal to be reduced.
8* HC Hi Cut Hz
200.0 Hz 20000.0 Hz
Allows the high frequencies in the signal to be reduced.
9 PHS Phase — 0.0 180.0 Adjusts the phase o set of the LFO between left and right channel.
10* FLC FeedLC Hz 10.0 Hz 500.0 Hz Adjusts the low cut  lter frequency in the feedback path.
11* FHC FeedHC Hz
200.0 Hz 20000.0 Hz
Adjusts the high cut  lter frequency in the feedback path.
12* FD Feed % -90.0% 90.0% Controls the percentage of positive or negative feedback.