User Manual

48 DeepMind 12 User Manual
The height of the bar indicates the current value setting.
The VALUE for each step can then be changed by using the UP/DOWN
switches or using the data entry fader.
(4) LENGTH - To adjust the LENGTH of the SEQUENCE (the number of steps),
press the GLOBAL switch (under the LEN text) to enter LENGTH editing mode.
When you are in LENGTH editing mode the virtual switch will be reversed
(white on black).
The LENGTH of the SEQUENCE can then be changed by using the UP/DOWN
switches or using the data entry fader.
(5) COMP - This switch allows you to COMPARE the current status of the
SEQUENCE being edited against the stored SEQUENCE. To use the SEQUENCE
COMPARE function, press the COMPARE switch (under the COMP text) to
enter COMPARE mode. When you are in COMPARE mode the virtual switch
will be reversed (white on black).
(6) SAVE -This switch takes you to the WRITE PROGRAM dialog (i.e. the normal
use of the WRITE switch).
To exit this menu press the ARP/SEQ EDIT switch to return to the main
ARPEGGIATOR/CONTROL SEQUENCE/ARP SETTINGS menu.
To exit the ARPEGGIATOR/CONTROL SEQUENCE/ARP SETTINGS menu press the
EDIT switch twice, (cycling past the ARP SETTINGS menu to exit), or press the
PROG switch to return the main display.
8.1.9 ARP SETTINGS
To access the ARP SETTING menu directly you can press the ARP/SEQ EDIT switch
three times. The ARP SETTINGS menu is then shown
To navigate the options in the SYNC SETTINGS menu, use the UP, DOWN, switches.
Selected parameters are adjusted using the -NO/+YES switches, the rotary knob
or the fader. The rotary knob has a click which allows very accurate control. The
fader allows rapid adjustment across the full range
CLOCK - This option allows you to select the Master BPM clock source for the
DeepMind 12 ARPEGGIATOR, CONTROL SEQUENCER, LFOs, ENVELOPEs and certain
time based FX parameters.
•
• Internal - The Master BPM clock is generated internally and uses the RATE
fader to control the tempo.
•
• MIDI (Auto) - The Master BPM clock is sourced from the MIDI IN socket and
uses the RATE fader to control the CLOCK DIVIDER. If no MIDI clock is present
at the MIDI IN socket, the DeepMind 12 will AUTO revert to the internally
generated clock.
•
• USB Auto - The Master BPM clock is sourced from the USB port and uses
the RATE fader to control the CLOCK DIVIDER. If no MIDI clock is present at
the USB port, the DeepMind 12 will AUTO revert to the internally generated
clock.
The default CLOCK setting is MIDI(Auto).
ARP-TO-MIDI - This option sends the notes played by the ARPEGGIATOR to all
MIDI sources. This allows you to record the ARPEGGIATOR note sequence.
The default ARP-TO-MIDI setting is O .
Note: When an external source (MIDI or USB) is used you can nudge the sync
point back and forward by using the -NO/+YES switches when "ARP RATE" is
selected in the ARPEGGIATOR menu. This allows you to o set the synchronisation
if required when working with other hardware/software and associated
latencies.
Note: Please ensure that you do not create any MIDI loops in your DAW MIDI
routing, as feeding back the ARPEGGIATOR notes will cause unpredictable results.
ARP-PARAMS - This option controls how the ARPEGGIATOR is linked.
•
• PROGRAM - In this mode the ARPEGGIATOR is stored with the program.
•
• GLOBAL - In this mode the ARPEGGIATOR keeps its current settings and
status even when you change programs. This can be useful for creating a
sequence and then browsing programs while the ARPEGGIATOR continues to
play the same notes/pattern/sequence.
Note: The CONTROL SEQUENCER remains una ected by this option.
Note: When switching from GLOBAL to PROGRAM mode, the current settings
are preserved and are used in place of the settings contained in the selected
program.
To exit the ARPEGGIATOR/CONTROL SEQUENCE/ARP SETTINGS menu press the EDIT
switch again (or press the PROG switch) to return the main display.
VALUE
SEQUENCE STEP VALUE