Manualshelf

User Manual

ManualsBrandsBehringer ManualsElectronic KeyboardsBEHRINGER DEEPMIND 12 (DEEPMIND12
101102103104105106107108109110
101 DeepMind 12 User Manual
Dual Pitch (DUAL PITCH SHIFTER)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1* SM1 Semi1 — -12.0 12.0 Adjusts the pitch of the  rst channel in semi-tones.
2* CN1 Cent1 — -50.0 50.0 Adjusts the pitch of the  rst channel in cents.
3 DL1 Delay1 ms 1.0 ms 500.0 ms Adjusts the time di erence between the wet and dry signals. Sync options from 4 to 1/64 bars.
4* GN1 Gain1 % 0.0% 100% Allows gain compensation to be applied to the  rst channel.
5* PN1 Pan1 % -100.0% 100% Allows panning of the  rst channel.
6* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
7* SM2 Semi2 — -12.0 12.0 Adjusts the pitch of the second channel in semi-tones.
8* CN2 Cent2 — -50.0 50.0 Adjusts the pitch of the second channel in cents.
9 DL2 Delay2 ms 1.0 ms 500.0 ms Adjusts the time di erence between the wet and dry signals. Sync options from 4 to 1/64 bars.
10* GN2 Gain2 % 0.0% 100% Allows gain compensation to be applied to the second channel.
11* PN2 Pan2 % -100.0% 100% Allows panning of the second channel.
12* HIC HiCut Hz 200.0 Hz 20000.0 Hz Allows the high frequencies a ected by the pitch shifting to be reduced.
RotarySpkr (ROTARY SPEAKER)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1* LOS LoSpeed Hz 0.1 Hz 4.0 Hz Adjusts the rotational speed when the Low Speed operation is selected.
2* HIS HiSpeed Hz 2.0 Hz 9.9 Hz Adjusts the rotational speed when the High Speed operation is selected.
3* ACC Accel % 0.0% 100% Adjusts how quickly the speed increases and decreases from the Slow mode to the Fast mode.
4* DIS Distance % 0.0% 100% Adjusts the distance between the Rotary speakers and the virtual microphone.
5* BAL Balance — -100.0 100.0 Adjusts the balance between the virtual horn and virtual drum controlling the signal tone.
6* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
7* MOT Motor — RUN STOP Allows The rotation e ect of the motor to be disengaged (STOP).
8* SPD Speed — SLOW FAST Selects either the slow or fast speeds for rotation.