Manual

58 DeepMind 6 User Manual
8.2.4 LFO EDIT MENU
1. To access the LFO EDIT menu, press the LFO EDIT switch.
Shortcut Note: To quickly change the LFO waveform shape, press and hold
the LFO EDIT switch, and move the LFO RATE fader.
2. Press the LFO EDIT switch once, and it will then start ashing as a reminder
you are in LFO EDIT mode. The LFO EDIT menu will appear:
3. To navigate the options in the LFO EDIT menu, use the BANK/UP, and BANK/
DOWN switches to the right of the display.
4. Selected parameters are adjusted using the -/NO and +/YES switches, the
rotary knob or the DATA ENTRY fader. The rotary knob has a click which
allows very accurate control. The fader allows rapid adjustment across the
full range.
• SHAPE - This option allows you to select one of the waveform shapes
from the following options (shown below with their typical visualization
waveforms from the PROG display).
Sine - A mathematically-correct sinusoidal waveform.
Triangle - A symmetrical triangular waveform.
Square - A symmetrical square waveform.
Ramp Up - An up-ramping triangular waveform.
Ramp Down - An down-ramping triangular waveform.
Smp&Hold (Sample and Hold) - A random stepped waveform which
transitions instantly from step to step.
Smp&Glide (Sample and Glide) - A random stepped waveform which
glides from step to step.
The default LFO SHAPE setting is the Triangle.
FLASHING=EDIT