Manual

ManualsBrandsBehringer ManualsSynthesizersDeepMind 6

26 DeepMind 6 User Manual

MIDI SETTINGS MENU - This menu contains settings for the MIDI sockets on the

rear of the DeepMind 6.

1. To access the MIDI SETTINGS menu, make sure that the '<' symbol on the

MIDI SETTINGS line is highlighted. Then press the +/YES switch, you will now

see the MIDI SETTINGS menu.

• MIDI-CTRL - This option sets the MIDI CONTROLLER communication mode

for the DeepMind 6 MIDI sockets on the rear of the synthesizer. You can

choose from the following options:

• O (No controller messages will be sent)

• Cc (Continuous Controller)

• NRPN (Non-Registered Parameters).

Note: Both MIDI and NRPN data is always received and actioned.

Note: For more information on controlling the DeepMind 6 via MIDI,

please consult the section on MIDI later in this document.

• PROG-CHANGE - This option sets the PROGRAM CHANGE communication

mode for the DeepMind 6 MIDI sockets. You can choose from the

following options:

• RX - Program change messages will be received only.

• TX - Program changes will be transmitted only.

• RX-TX - Program changes will be transmitted and received.

• NONE - No program change messages will be sent or received.

Note: PROG-CHANGE is not available if POLY CHAIN is ON in the CHAIN

PARAMETERS page of the POLY EDIT menu.

• RX-CHANNEL - This option sets the MIDI channel that will be used to

RECEIVE MIDI messages. The CHANNEL can be ALL, or any number from 1-16.

• TX CHANNEL - This option sets the MIDI channel that will be used to

TRANSMIT MIDI messages. The CHANNEL can be any number from 1-16, or

RxCh, the same setting as the RX channel.

• SOFT-THRU - This option enables PASS-THRU mode from the MIDI INPUT

socket to the MIDI OUTPUT socket. (Any messages received at the MIDI INPUT

are passed thru to the MIDI OUTPUT socket.) The options are On or O.

Note: SOFT-THRU is not available if POLY CHAIN is ON in the CHAIN

PARAMETERS page of the POLY EDIT menu.

• MIDI>USB-THRU - This option enables PASS-THRU mode from the MIDI

INPUT socket to the USB host. The options are On or O.

2. To exit this menu press the GLOBAL switch to return to the

CONNECTIVITY menu.

USB SETTINGS MENU- This menu contains settings for the USB port on the rear

of the DeepMind 6.

1. To access the USB SETTINGS menu, make sure that the '<' symbol on the USB

SETTINGS line is highlighted. Then press the +/YES switch, and the USB

SETTINGS menu will appear.

• USB-CTRL - This option sets the MIDI CONTROLLER communication mode for

the USB port on the rear of the synthesizer. You can choose