Calibration
Synthesizers and Samplers
DEEPMIND 6
Condential, for internal use only. Not to be reproduced.
Music Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.
Technical specications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global
Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
NOTE: To cancel the routine, press the -/NO switch, and you will see the following message:
To conrm the CALIBRATION of the PEDAL input, press the +/YES switch: The calibration data will then be stored for
the PEDAL and you will be returned to the CALIBRATE menu. From here you can perform another calibration from
the menu, or press the GLOBAL switch again to return to the SYSTEM SETTINGS menu.
End of Procedure









