Manual
Table Of Contents
- Thank you
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- About the DeepMind 12
- 1. Introduction
- 2. Features
- 3. Controls
- 4. Program Management
- 5. Playing Guide
- 6. Signal Path / Voice Structure
- 7. Menu System
- 8. Programming
- 9. Effects Reference Guide
- 10. Short-cuts
- 11. Applications
- 12. DAW MIDI Configuration
- 13. System Block Diagram
- 14. Connection Wiring Diagrams
- 15. Technical Specifications
- 16. MIDI Commands
- 17. MIDI NRPN Commands
- 18. Global Commands
- 19. MIDI SysEx Commands
- 20. Firmware Update
- 21. Troubleshooting
- 22. Bootloader Menu
- 23. Definition of Terms
- 24. Appendix 1 - Octave Shifting
- 25. Appendix 2 - ARP/SEQ/LFO Sync Timing
- 26. Appendix 3 - Poly Chords
- 27. Appendix 4 - Default Program
- 28. Appendix 5 - Revert to Panel
151 DeepMind 12 User Manual
26. Appendix 3 - Poly Chords
The following tables show some of the Poly Chords created automatically by the
Poly Chord WIZARD. In this mode, there are four categories (CAT): MAJOR, MINOR,
DOM, and DIM. Each category has various TYPES available, and three modiers
(MOD): BASS, SPREAD, and SPREAD2.
In Poly Chord mode, using the WIZARD, you can hold down a root note and then
use the -/NO/, +/YES, BANK/UP, BANK/DOWN, Rotary Encoder, and DATA ENTRY
Fader to quickly cycle through all the options as you listen.
MAJOR Ma Chords
These typical display screens show the Chords when the parameters as follows:
• CAT: MAJOR, TYPE: Ma, MOD: NONE, For 12 trigger notes in Octave 2: