Manual
Table Of Contents
- Thank you
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- About the DeepMind 12
- 1. Introduction
- 2. Features
- 3. Controls
- 4. Program Management
- 5. Playing Guide
- 6. Signal Path / Voice Structure
- 7. Menu System
- 8. Programming
- 9. Effects Reference Guide
- 10. Short-cuts
- 11. Applications
- 12. DAW MIDI Configuration
- 13. System Block Diagram
- 14. Connection Wiring Diagrams
- 15. Technical Specifications
- 16. MIDI Commands
- 17. MIDI NRPN Commands
- 18. Global Commands
- 19. MIDI SysEx Commands
- 20. Firmware Update
- 21. Troubleshooting
- 22. Bootloader Menu
- 23. Definition of Terms
- 24. Appendix 1 - Octave Shifting
- 25. Appendix 2 - ARP/SEQ/LFO Sync Timing
- 26. Appendix 3 - Poly Chords
- 27. Appendix 4 - Default Program
- 28. Appendix 5 - Revert to Panel
112 DeepMind 12 User Manual
3TapDelay (3-TAP DELAY)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1 TIM Time ms 1.0 ms 1500.0 ms Sets the master delay time, and the rst stage. Time synchronised options from 4 to 1/64 bars.
2* GNT GainT % 0.0% 100% Sets the gain level of the rst stage of the delay.
3* PNT PanT % -100% 100% Sets the position of the rst delay stage in the stereo eld.
4* FBK Feedback % 0.0% 100% Adjusts the amount of feedback.
5 FCA FactorA — — — Controls the delay time in the second stage of the delay (¼ ⁄ ½ ⁄, 1, ⁄ ⁄, 2, 3).
6* GNA GainA % 0.0% 100% Controls the gain level of the second delay stage.
7* PNA PanA % -100% 100% Sets the position of the second delay stage in the stereo eld.
8 FCB FactorB — — — Controls the delay time in the third stage of the delay (¼ ⁄ ½ ⁄, 1, ⁄ ⁄, 2, 3).
9* GNB GainB % 0.0% 100% Controls the gain level of the third delay stage.
10* PNB PanB % -100% 100% Sets the position of the third gain stage in the stereo eld.
11 XFD X-Feed — OFF ON Turns the stereo cross-feedback of the delays On or O.
12* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
* These parameters are available as modulation destinations in the Modulation Matrix
4TapDelay (4-TAP DELAY)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1 TIM Time ms 1.0 ms 1500.0 ms Sets the master delay time, and the rst stage. Time synchronised options from 4 to 1/64 bars.
2* GN Gain % 0.0% 100% Sets the gain level of the rst stage of the delay.
3* FBK Feedback % 0.0% 100% Adjusts the amount of feedback.
4 SPR Spread — 0.0 6.0 Positions the rst delay stage in the stereo eld.
5 FCA FactorA — — — Controls the delay time in the second stage of the delay (¼ ⁄, ½ ⁄, 1, ⁄ ⁄, 2, 3).
6* GNA GainA % 0.0% 100% Controls the gain level of the second delay stage.
7 FCB FactorB — — — Controls the delay time in the third stage of the delay (¼ ⁄ ½ ⁄, 1, ⁄ ⁄, 2, 3).
8* GNB GainB % 0.0% 100% Controls the gain level of the third delay stage.
9 FCC FactorC — — — Controls the delay time in the fourth stage of the delay (¼ ⁄ ½ ⁄, 1, ⁄ ⁄, 2, 3).
10* GNC GainC % 0.0% 100% Controls the gain level of the fourth delay stage.
11 XFD X-Feed — 0.0 1.0 Turns the stereo cross-feedback of the delays On or O.
12* MIX Mix % 0.0% 100% Controls the mix (or ratio) of wet (processed) and dry (unprocessed) signals.
* These parameters are available as modulation destinations in the Modulation Matrix