Manual
Table Of Contents
- Thank you
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- About the DeepMind 12
- 1. Introduction
- 2. Features
- 3. Controls
- 4. Program Management
- 5. Playing Guide
- 6. Signal Path / Voice Structure
- 7. Menu System
- 8. Programming
- 9. Effects Reference Guide
- 10. Short-cuts
- 11. Applications
- 12. DAW MIDI Configuration
- 13. System Block Diagram
- 14. Connection Wiring Diagrams
- 15. Technical Specifications
- 16. MIDI Commands
- 17. MIDI NRPN Commands
- 18. Global Commands
- 19. MIDI SysEx Commands
- 20. Firmware Update
- 21. Troubleshooting
- 22. Bootloader Menu
- 23. Definition of Terms
- 24. Appendix 1 - Octave Shifting
- 25. Appendix 2 - ARP/SEQ/LFO Sync Timing
- 26. Appendix 3 - Poly Chords
- 27. Appendix 4 - Default Program
- 28. Appendix 5 - Revert to Panel
108 DeepMind 12 User Manual
Enhancer (ENHANCING EQ)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1* OGN OutGain dB -12.0 dB 12.0 dB Compensates for changes in level resulting from the eect.
2* SPR Spread % 0.0% 100% Emphasizes the stereo content for a wider mix.
3* BGN BassGain % 0.0% 100% Adjusts the gain of the bass band.
4* BFR BassFreq — 1.0 50.0 Adjusts the frequency of the bass band.
5* MGN MidGain % 0.0% 100% Adjusts the gain of the mid band.
6* MIQ MidQ — 1.0 50.0 Adjusts the Q-factor of the mid band.
7* HIG HiGain % 0.0% 100% Adjusts the gain of the high band.
8* HIF HiFreq — 1.0 50.0 Adjusts the frequency of the high band.
9 SOL FactorC — OFF ON Solo mode - used to isolate only the audio resulting from the eect.
* These parameters are available as modulation destinations in the Modulation Matrix
FairComp (COMPRESSOR)
No DM12 REF PARAMETER UNITS MIN MAX DESCRIPTION
1 MOD Mode — — Mode of operation: O, Stereo, Dual, M/S (Mid/Side).
2* INL InGain L/M — -20.0 0.0 Controls the input gain for the Left/Mid signal.
3* THL ThreshL/M — 0.0 10.0 Controls the threshold for the Left/Mid signal.
4 TML TImeL/M — 1.0 6.0 Controls the attack and release time for the Left/Mid signal.
5* DCL DCBiasL/M % 0.0% 100% Adjust the ratio and knee of the compression curve for the Left/Mid signal.
6* OGL OutGainL/M dB -18.0 dB 6.0 dB Controls the output gain for the Left/Mid signal.
7* BAL Bias Bal % -100.0% 100% Adjust the bias current, creating accentuation of attacks
8* INR InGain R/S — -20.0 0.0 Controls the input gain for the Right/Side signal.
9* THR ThreshR/S — 0.0 10.0 Controls the threshold for the Right/Side signal.
10 TMR TImeR/S — 1.0 6.0 Controls the attack and release time for the Right/Side signal.
11* DCR DCBiasR/S % 0.0% 100% Adjust the ratio and knee of the compression curve for the Right/Side signal.
12* OGR OutGainR/S dB -18.0 dB 6.0 dB Controls the output gain for the Right/Side signal.
* These parameters are available as modulation destinations in the Modulation Matrix