Manual
DIGITAL PRO MIXER DDM4000
Introduction 5
Introduction1.
Congratulations! The DDM4000 is a state-of-the-art 32-bit digital
DJ mixer, jam-packed with creative tools, yet its intuitive layout
will let you feel at home in an instant. Editing, storing and recalling
your settings is simply a breeze!
Hook up your turntables and CD/MP3 players to its 4 stereo
channels, each with fully programmable EQ and Kill switches. Put
ultimate versatility at your ngertips with fully programmable beat-
sync’able multi-FX modules, a pair of high-precision BPM counters
and a digital crossfader with custom curve adjustment. And the
super-cool BPM-sync’d sampler with real-time pitch control, loop
and reverse functions will make your crowd go wild.
Please read this manual to familiarize yourself with the +
control elements of the unit and its functions. After
you have carefully read this manual, keep it for future
reference.
Before you get started1.1
Shipment1.1.1
Your DDM4000 was carefully packed at the factory, and the
packaging was designed to protect the unit from damage caused
by rough handling. Nevertheless, we recommend that you carefully
examine the packaging and its contents for any signs of physical
damage that may have occurred during transit.
If the unit is damaged, please do NOT return it to us; +
instead, notify your dealer and the shipping company
immediately, otherwise claims for damage or replace-
ment may not be granted.
We recommend using a case to ensure optimal protec- +
tion of the device.
Please always use the original packaging to avoid da- +
mage due to storage or shipping.
Never let unsupervised children play with the DDM4000 +
or with its packaging.
Recycle whenever possible. +
Initial operation1.1.2
Ensure adequate air supply and to avoid overheating do not place
the unit near radiators etc.
Before you connect your DDM4000 to the mains, please +
make sure that your local voltage matches the voltage
required by the unit.
Caution! The following applies only to units that can be switched
between 120 V and 230 V: The fuse holder on the mains connector
has 3 triangular markings, with two of these triangles opposing
each other. The DDM4000 is set to the operating voltage printed
next to these markers and can be set to another voltage by turning
the fuse holder by 180°.
Please note that when operating the unit at 120 V, +
a higher fuse rating is required. Please refer to the
“Specications” for details.
If you set the unit to a different mains voltage, be sure +
to use a fuse of the correct type and rating. Please refer
to the “Specications” for details.
Blown fuses must be replaced by fuses of the same +
type and rating! Please refer to the “Specications”
for details.
Caution!
Before changing the fuse, switch off the device and +
pull the plug to avoid electric shock or damage to the
device.
The DDM4000 power connection is made by using the enclosed
cable and the amplier’s standard IEC receptacle. It meets all of
the international safety certication requirements.
Please make sure that all units have a proper earth +
connection. For your own safety, never remove or
disable the earth conductor from the unit or of the AC
power cord.
IMPORTANT NOTES CONCERNING
INSTALLATION
The sound quality may diminish within the range of pow- +
erful broadcasting stations and high-frequency sources.
Increase the distance between the transmitter and the
device and use shielded cables for all connections.
Online registration1.1.3
Please do remember to register your new BEHRINGER equipment
right after your purchase by visiting www.behringer.com (alterna-
tively www.behringer.de) and kindly read the terms and conditions
of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original equip-
ment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the
distributor nearest you. A list of distributors can be found in the
support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us process
your repair claims quicker and more efciently.
Thank you for your cooperation!
Caution!
Extreme output volumes may damage your hearing and/ +
or your loudspeakers. Turn down all volume and level
controls before you switch on the unit. Always set the
volume to an appropriate level.