User Manual CABLE TESTER CT100 Professional 6-in-1 Cable Tester
CABLE TESTER CT100 User Manual 1. Introduction Congratulations! With the CT100, you have purchased an indispensable tool that enables you to easily check the most common cables used by musicians and sound engineers. Faulty cables are a common cause of failure in live and studio situations. This microprocessor-controlled device was designed to ensure fast, reliable problem location. Various test modes and the included belt clip add to its flexibility. 2.
CABLE TESTER CT100 User Manual To test a cable for short circuits, connect one end of the cable to the appropriate OUT jack of the CT100. The display works as in CABLE TESTER MODE (see chapter 2). However, it now indicates connections between out pins. If no LEDs light, the cable is free of short circuits. 3.1 Continuity check in Installed Cable Tester Mode For a continuity check, connect a shorting jack (a jack in which pins are short-circuited to one another) to the other end of the cable.
CABLE TESTER CT100 User Manual 5. Phantom Power Detect In TEST TONE MODE, pins 2 and 3 are monitored for external DC voltage (commonly supplied for condenser microphones). The PHANTOM LEDs will light if DC voltage above approx. 9 V is detected. 6. Wiring Balanced ¼" TRS connector strain relief clamp sleeve ring tip sleeve ground/shield ring cold (-ve) tip hot (+ve) For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug.
CABLE TESTER CT100 User Manual 1 2 1 3 2 3 output input 1 = ground/shield 2 = hot (+ve) 3 = cold (-ve) For unbalanced use, pin 1 and pin 3 have to be bridged XLR connectors (pin numbers visible on connectors) Pin 2 (tip) Pin 1 (sleeve) RCA connector 7. Limited Warranty For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online at www.music-group.com/warranty.
CABLE TESTER CT100 User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION CABLE TESTER CT100 Responsible Party Name: MUSIC Group Services US Inc. Address: 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone/Fax No.
We Hear You
