For more details on the full functionality of this product, see the product page on behringer.com and download the full manual.
REFERENCE AMPLIFIER A500 Quick Start Guide Important Safety Instructions LIMITED WARRANTY LEGAL DISCLAIMER 3
4 REFERENCE AMPLIFIER A500 Instrucciones de seguridad Quick Start Guide NEGACIÓN LEGAL GARANTÍA 5
6 REFERENCE AMPLIFIER A500 Consignes de sécurité Quick Start Guide DÉNI LÉGAL GARANTIE 7
8 REFERENCE AMPLIFIER A500 Wichtige Sicherhteitshinweise Quick Start Guide HAFTUNGSAUSSCHLUSS EINGESCHRÄNKTE GARANTIE 9
10 REFERENCE AMPLIFIER A500 Instruções de Segurança Importantes Quick Start Guide LEGAL RENUNCIANTE GARANTIA LIMITADA 11
12 13 REFERENCE AMPLIFIER A500 Quick Start Guide REFERENCE AMPLIFIER A500 Controls (EN) Controls (1) The POWER switch is used to power up the A500. The POWER switch should always be in its “Off” position when you connect the unit to the mains. (2) POWER LED lights up as soon as you power up the A500. (2) Each channel features a volume control. Use it to adjust gain on your A500. Both volume controls should be turned all the way to the left whenever you power the unit up or down.
14 15 REFERENCE AMPLIFIER A500 Quick Start Guide REFERENCE AMPLIFIER A500 Controls (ES) Controles (1) Con el interruptor POWER se enciende el A500. Este interruptor debe estar en la posición de apagado al conectar el aparato a la red de corriente eléctrica. Al encender el amplificador, se ilumina el LED POWER. (2) Cada canal dispone de un control de nivel con el que se determina la amplificación del A500.
16 17 REFERENCE AMPLIFIER A500 Quick Start Guide REFERENCE AMPLIFIER A500 Controls (DE) Regler (1) Mit dem POWER-Schalter nehmen Sie den A500 in Betrieb. Der POWER-Schalter sollte sich in der Stellung “Aus” befinden, wenn Sie die Verbindung zum Stromnetz herstellen. Die POWER-LED leuchtet, sobald Sie das Gerät einschalten. (2) Jeder Kanal besitzt einen Lautstärkeregler, mit dem Sie die Endverstärkung des A500 einstellen können.
18 REFERENCE AMPLIFIER A500 Quick Start Guide 19 Other important information Specifications Output Power RMS Power Stereo Mode (both channels driven) 8 Ω / 1 kHz @ 1% THD 4 Ω / 1 kHz @ 1% THD Bridged Mono 8 Ω / 1 kHz @ 1% THD Peak Power Stereo Mode (both channels driven) 8 Ω / 1 kHz 4 Ω / 1 kHz Bridged Mono 8 Ω / 1 kHz Input Sensitivity Distortion Frequency Response Voltage Gain Damping Factor Input impedance Signal-to-Noise Important information Rear 185 W 375 W 175 W 300 W 600 W 1.64 V <0.
We Hear You
