Manual

9 REFERENCE AMPLIFIER A500 Manual de uso
4.3 Conexiones de audio
Para las diferentes aplicaciones requiere diversos tipos de cable. Las siguientes
ilustraciones le muestran cómo deben ser éstos. Utilice siempre cables de
altacalidad.
output
For unbalanced use, pin 1 and pin 3
have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
input
12
3
1
2
3
Balanced use with XLR connectors
Fig. 4.1: Conectores XLR
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
Unbalanced ¼" TS connector
tip
(signal)
Fig. 4.2: Jack mono de 6,3 mm
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
hot (+ve)
Fig. 4.3: Jack estéreo de 6,3 mm
shield
sleevesleeve
tip tip
Fig. 4.4: Conexiones RCA no balanceadas