User Manual

PODCAST & RECORDING QUICK-START GUIDE

Installation Guide – USB mixer/interface

Note: The Voice Studio package does not include a pair of headphones

Basic Equipment:

Microphone, USB mixer/interface, headphones, computer

Now that you have a basic understanding of what podcasting is and have

the necessary gear, it’s time to set up the equipment, install the software and

getstarted.

1. Install any necessary drivers before connecting your USB interface. They can

be downloaded from the download area of the product page, or from the

support section at www.musictribe.com/brand/behringer/home.

2. Once the drivers are installed, you may connect the interface to your

computer with the included USB cable.

3. Connect your microphone to the input of your mixer or audio interface using

the included XLR cable.

4. Connect a monitoring device. You may connect the outputs of the mixer/

interface to a pair of powered speakers, or connect a set of headphones.

5. Be sure to read the manuals for the individual components of your podcast/

recording system to ensure proper hookup and operation.

6. If using a Windows operating system, it is important to install the necessary

ASIO driver. This is not a factor on Mac systems. Visit the download area of

the USB interface’s product page, or go to the Support > Download Center at

www.musictribe.com/brand/c/behringer/downloads?active=downloads to

download the required driver.

Microphone Mixer/Interface Computer

USB cable

Headphones

XLR cable