Datasheet

Page 4 of 4
behringer.com
For service, support or more information contact the BEHRINGER location nearest you:
BEHRINGER Australia tel.: [phone], fax: [phone] BEHRINGER Germany tel.: +49
2154 9206 4149, fax: [phone] BEHRINGER Japan tel.: [phone], fax: [phone]
1181 BEHRINGER Singapore tel.: [phone], fax: [phone] BEHRINGER USA / CANADA
tel.: [phone], fax: [phone]
©2009 Red Chip Company Ltd. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be
suff ered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. All trademarks (except BEHRINGER, the BEHRINGER logo, JUST LISTEN, EUROPOWER, XENYX and EUROLIVE)
mentioned belong to their respective owners and are not affi liated with BEHRINGER. 985-10000-00383
EP2000/EP4000
Power Amplifi ers
Output Power
20 Hz – 20 kHz @ 0.1% THD, both channels driven
EP2000
8Ω per channel 350 W
4Ω per channel 500 W
2Ω per channel 650 W
EP4000
8Ω per channel 550 W
4Ω per channel 950 W
2Ω per channel 1250 W
RMS @ 1% THD (sine wave), bridged mode
EP2000
8Ω 1000 W
4Ω 1300 W
EP4000
8Ω 1750 W
4Ω 2400 W
Peak Power, both channels driven
EP2000
8 Ω per channel 400 W
4 Ω per channel 750 W
2 Ω per channel 1000 W
EP4000
8 Ω per channel 750 W
4 Ω per channel 1400 W
2 Ω per channel 2000 W
Peak Power, bridged mode
EP2000
8Ω 1500 W
4Ω 2000 W
EP4000
8Ω 2800 W
4Ω 4000 W
Distortion
EP2000 <0.01%
EP4000 <0.02%
Frequency Response
At 10 dB below rated output power 20 Hz – 20kHZ, +0/-dB
At -3 dB points 5 Hz – 50 kHz
Damping Factor
EP2000/EP4000 >300 @ 8Ω
Noise
Unweighted, 20 Hz to 20 kHz -100 dB
Voltage gain
EP2000/EP4000 40X (32 dB)
EP2000/EP4000 50X (34 dB)
Input sensitivity
VRMS (@ 8Ω) 1.15V (+3.4 dBu)
Input Impedance
EP2000/EP4000 10kΩ unbalanced,
20kΩ balanced
Controls
Front Power switch, gain control
(channels 1 and 2)
Rear DIP switches (10x)
Indicators
POWER green LED
CLIP red LED, 1 per channel
SIGNAL yellow LED, 1 per channel
Connectors
Inputs Balanced XLR and ¼"
TRS connectors
Outputs Touch-proof binding posts
and professional speaker
connectors
Cooling
EP2000/EP4000 Continuously variable speed
fan, back-to-front air  ow
Ampli er protection
EP2000/EP4000 Full short circuit, open
circuit, thermal and HF
protection Stable into
reactive or mismatched
loads
Load protection
EP2000/EP4000 Turn-on/o muting,
AC coupling
Output circuit type
EP2000 Class AB complementary
linear output
EP4000 Class H complementary
linear output
Power supply
Mains Voltage/Breaker
EP2000 100-120 V~, 50/60 Hz15A
EP4000 220-230 V~, 50/60 Hz8A
Power consumption
EP2000 1600W
EP4000 2600W
Mains Connector Standard IEC receptacle
Dimensions/weight
Dimensions (HxWxD)
EP2000/EP4000 approx. 88 x 483 x 402mm
approx. 3.5 x 19 x 15.8
Weight
EP2000 approx. 15.7 kg/34.6 lbs
EP4000 approx. 16.6 kg/36.6 lbs
BEHRINGER is constantly striving to maintain the highest
professional standards. As a result of these e orts, modi cations
may be made from time to time to existing products without prior
notice. Speci cations and appearance may di er from those listed
or illustrated.