Manual

10 XENYX 1002B Manual de uso
6. Especicaciones
Mono Inputs
Microphone inputs (XENYX Mic preamp)
Type XLR connector, electronically balanced,
discrete input circuit
Mic E.I.N.1 (20 Hz - 20 kHz)
@ 0  source resistance -134 dB 135.7 dB A-weighted
@ 50  source resistance -131 dB 133.3 dB A-weighted
@ 150  source resistance -129 dB 130.5 dB A-weighted
Frequency response (-1 dB) <10 Hz - 160 kHz (-1 dB)
Frequency response (-3 dB) <10 Hz - 200 kHz (-3 dB)
Gain range +14 dB to +60 dB
Max. input level +12 dBu @ +10 dB GAIN
Impedance 2.6 k Ohms balanced
Signal-to-noise ratio 120 dB A-weighted
(0 dBu In @ +22 dB GAIN)
Distortion (THD + N) 0.005% / 0.004% A-weighted
Line Input
Type ¼" TRS jack, electronically balanced
Impedance 20 k Ohms balanced,
10 k Ohms unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB GAIN
Frequency Response (Mic In → Main Out)
<10 Hz - 90 kHz (-1 dB) +0 dB / -1 dB
<10 Hz - 160 kHz (-3 dB) +0 dB / -3 dB
Stereo Inputs
Type 2 x ¼" TRS jack, balanced
Impedance 20 k Ohms balanced,
10 k Ohms unbalanced
Gain range -20 dB to +20 dB
Max. input level +22 dBu @ 0 dB GAIN
CD/Tape In
Type RCA connector
Impedance 10 k Ohms
Max. input level +22 dBu
Equalizer
LOW 50 Hz / ±15 dB
MID 700 Hz / ±15 dB
HIGH 10 kHz / ±15 dB
Channel Inserts
Type ¼" TRS jack, unbalanced
Max. input level +22 dBu
MON/FX Send
Type ¼" mono jack, unbalanced
Impedance 120 Ohms
Max. output level +22 dBu
Main Outputs
Type ¼" TRS jack, electronically balanced
Impedance 240 Ohms balanced,
120 Ohms unbalanced
Max. output level +28 dBu
Phones Output
Type ¼" TRS jack, unbalanced
Max. output level +19 dBu / 150 Ohms (+25 dBm)
CD/Tape Out
Type RCA connector
Impedance 1 k Ohms
Max. output level +22 dBu