User Manual

16 17Quick Start GuideBIGFOOT
(EN) Step 1: Controls
(4)
(5)
(7)
(8)
(6)
BIGFOOT Controls
(2)
(1)
(3)
(1)
CAPSULE – This area is where the
microphone diaphragms pick up sound.
(2)
GAIN – This knob adjusts the level of the
microphone's output signal through the
USB or PHONES output.
(3)
PATTERN – Depending on your recording
needs, use this rotary switch to choose
between four polar patterns:
Stereo, Omnidirectional, Cardioid
or Bidirectional.
(4)
MUTE – Press this button to mute o the
microphone’s output. When muted,
the LED embedded in the button will light
up red. When unmuted, the LED will light
green and show normal operation/
bus-power is active.
(5)
VOLUME (PHONES) – Turn this knob to
adjust the output volume for the
PHONES jack.
(6)
PHONES – This output connects to
headphones with ⁄" stereo plugs.
Use this output to monitor your
microphone sound in real time with
no latency.
(7)
USB – Connect the microphone to a
computer with a USB cable.
(8)
THREAD – Mount the microphone on a
standard microphone stand by using the
built-in mounting thread. If necessary,
remove the reduction thread to adapt the
mounting to your tripod.