User Manual

2 SHARK FBQ100 User Manual
Thank you
Thank you very much for expressing your condence in BEHRINGER products by
purchasing the SHARK FBQ100.
Table of Contents
Thank you ....................................................................... 2
Important Safety Instructions ...................................... 3
Legal Disclaimer ............................................................. 3
Limited Warranty ........................................................... 3
1. Introduction ............................................................... 5
1.1 The concept .......................................................................... 5
1.2 Before you begin ................................................................ 5
1.3 Control elements ................................................................ 5
2. Applications ............................................................... 7
2.1 Wiring the FBQ100: general remarks ........................... 7
2.1.1 Connection between microphone and
mixing console.......................................................................... 7
2.1.2 Connection between line-level source and
mixing console.......................................................................... 7
2.1.3 Connection between mixing console and
power amplier ........................................................................ 7
2.1.4 The SHARK used in the monitor path .................... 7
2.1.5 The SHARK used in single channels
and subgroups .......................................................................... 8
2.1.6 Automatic “tuning in” of P.A. and
monitor systems ....................................................................... 8
2.2 The feedback destroyer in the SHARK ........................ 8
2.3 The integrated delay ......................................................... 8
2.4 The noise gate function ................................................... 9
2.5 The low cut lter in the SHARK ...................................... 9
2.6 The compressor function ................................................ 9
3. Installation ................................................................. 9
3.1 Audio connections ............................................................. 9
4. Specications ........................................................... 11
5. Rackmount (Optional) ............................................. 11