Buying Guide

ManualsBrandsBEHR ManualsPaint5 gal. #65005 Gray Granite Grip Interior/Exterior Concrete Paint

BEHR PREMIUM GRANITE GRIP

APPLICATORS:

 1/4” Adhesive Roller Cover

 Nylon/Polyester Brush

 Optional: Texture Sprayer for Large Projects

Clean and etch

surface until it

feels like 150 grit

sandpaper.

Step 1

Apply coating to the

outer edges of your

project area and ll in

hairline cracks.

Step 2

Apply 1st Coat:

First coat acts as the

base and will not

completely cover the

surface by design.

NOTE: MUST USE 1/4”

ADHESIVE ROLLER COVER

Step 3

Apply 2nd Coat

(1 gallon covers

≈ 50 sq. ft. with

2 required coats)

Step 4

BEHR PREMIUM

CONCRETE DYE

APPLICATORS:

 High Quality Pump Sprayer

with a Conical Tip

Clean and etch

surface until it

feels like 150 grit

sandpaper.

Step 1

Apply Base Color

(250 sq. ft. per gallon)

Step 2

Apply Accent Color

(250 sq. ft per 2 quarts)

Step 3

Apply Wet-Look Sealer

(200-450 sq. ft per gallon)

Step 4

DECORATIVE

CONCRETE FINISHES

GRANITE GRIP

FPO

Cover Photo: (left) Concrete Dye - Florence Merlot | (right) Granite Grip - Sahara Canyon GG-11

• Tintable to 36 Custom Colors

• 26 Recommended Color Blends

• Create Your Own Unique Color Blend

• Available in Tint Base Gallons and Quarts

• Use Quart as: Accent Color, Small Project,

Color Sample or Touch Up

• Revives Concrete Surfaces

• Durable, Protective Finish

• Available in 2 Pre-mixed and 16 Custom Colors

• Fills in Hairline Cracks

• Resists Hot Tire Pick-Up, Dirt, Grease

& Household Stains

• Ideal for Driveways, Garage Floors, Porches,

Patios, Walkways and Interior Concrete Surfaces

BEHR PREMIUM

CONCRETE DYE BEHR PREMIUM

GRANITE GRIP

BEFORE

Gialo Antique

*Refer to all product instructions for proper surface preparation and application. Photos may have been digitally enhanced. Actual results may vary.

EASY APPLICATION STEPS

DECORATIVE, SLIP-RESISTANT

CONCRETE COATING

TRANSFORMS ORDINARY CONCRETE

TO A NATURAL STONE-LIKE FINISH

PROJECT ITEMS:

 Plastic Sheeting

 Painter’s Tape

 Broom

 Hose

 Plastic Watering Can

 Stir Stick

 Stiff Bristle Brush

(Non-Metal)

Pebble Sunstone

GG-13

Interior and

Exterior

Surface Prep

Required

Interior and

Exterior

Surface Prep

Required

For more info, see www.homedepot.com/behrconcretedye For more info, see www.homedepot.com/behrgranitegrip

Step 4

REV. 11/17

50004049 C-CONCRETE-DYE/GRANITE-GRIP

behr.com

Have a coating or

product question?

Visit behr.com or call

1-800-854-0133 Ext. 2 (U.S.).

0 8 2 4 7 4 0 0 2 8 0 3

Summary of content (3 pages)

PAGE 1
BEHR PREMIUM® GRANITE GRIP® For more info, see www.homedepot.
PAGE 2
GRANITE GRIP® TAN BASE COLOR OPTIONS GRANITE GRIP® GRAY BASE COLOR OPTIONS Tan No. 655 Tan No. 655 Pebble Sunstone GG-13 Copper Marble GG-10 Sunset Ridge GG-09 Sahara Canyon GG-11 Imperial Jade GG-12 Baltic Stone GG-16 Autumn Mountain GG-14 Amethyst GG-15 Color samples and textures are simulated. There may be a slight difference between the color of the chip shown and the actual coated surface. Gray No. 650 Gray No.
PAGE 3
EASY APPLICATION STEPS* BEHR PREMIUM GRANITE GRIP® Clean and etch surface until it feels like 150 grit sandpaper. Apply 1st Coat: First coat acts as the base and will not completely cover the surface by design. Step 1 Step 3 NOTE: MUST USE 1/4” ADHESIVE ROLLER COVER Apply coating to the outer edges of your project area and fill in hairline cracks. Apply 2nd Coat (1 gallon covers ≈ 50 sq. ft.