MSDS

ManualsBrandsBEHR ManualsPaint1-gal. Black Direct-to-Metal Semi-Gloss Interior/Exterior Paint

View (M)SDS Section :

SECTION 1 : PRODUCT AND COMPANY IDENTIFICATION

Product Name:

BEHR™ Int/Ext Direct-To-Metal Semi-Gloss Paint - Black

Product Code:

3220

MSDS Manufacturer Number:

3220

Manufacturer Name:

BEHR Process Corporation

Address:

3400 W. Segerstrom Avenue

Santa Ana, CA 92704

General Phone Number:

(714) 545-7101

General Fax Number:

(714) 241-1002

Customer Service Phone

Number:

(800) 854-0133 ext. 2

CHEMTREC:

For emergencies in the US, call CHEMTREC: 800-424-9300

Canutec:

In Canada, call CANUTEC: (613) 996-6666 (call collect)

MSDS Creation Date:

December 03, 2012

MSDS Revision Date:

October 15, 2013

(M)SDS Format:

According to ANSI Z400.1-2004

HMIS

Health Hazard

Fire Hazard

Reactivity

Personal

Protection

SECTION 2 : COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name

CAS#

Ingredient Percent

Dipropylene glycol butoxy ether

29911-28-2

1 - 5 by weight

Carbon black, amorphous

1333-86-4

1 - 5 by weight

Nepheline Syenite

37244-96-5

1 - 5 by weight

Kaolin

1332-58-7

1 - 5 by weight

SECTION 3 : HAZARDS IDENTIFICATION

Emergency Overview:

Irritant.

Potential Health Effects:

Eye:

May cause irritation.

Summary of content (6 pages)

PAGE 1
View (M)SDS Section : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SECTION 1 : PRODUCT AND COMPANY IDENTIFICATION Product Name: BEHR™ Int/Ext Direct-To-Metal Semi-Gloss Paint - Black Product Code: 3220 MSDS Manufacturer Number: 3220 Manufacturer Name: BEHR Process Corporation Address: 3400 W.
PAGE 2
Skin: May cause irritation. Inhalation: Prolonged or excessive inhalation may cause respiratory tract irritation. Ingestion: May be harmful if swallowed. May cause vomiting. Chronic Health Effects: Prolonged or repeated contact may cause skin irritation. Signs/Symptoms: Overexposure may cause headaches and dizziness. Target Organs: Eyes. Skin. Respiratory system. Digestive system. Aggravation of Pre-Existing Conditions: None generally recognized.
PAGE 3
Hygiene Practices: Wash thoroughly after handling. Avoid contact with eyes and skin. Avoid inhaling vapor or mist. SECTION 8 : EXPOSURE CONTROLS, PERSONAL PROTECTION - EXPOSURE GUIDELINES Engineering Controls: Use appropriate engineering control such as process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Good general ventilation should be sufficient to control airborne levels.
PAGE 4
Chemical Stability: Stable under normal temperatures and pressures. Hazardous Polymerization: Not reported. Conditions to Avoid: Heat, flames, incompatible materials, and freezing or temperatures below 32 deg. F. Incompatible Materials: Oxidizing agents. Strong acids and alkalis. SECTION 11 : TOXICOLOGICAL INFORMATION Dipropylene glycol butoxy ether : RTECS Number: UA8200000 Eye: Eye - Rabbit Standard Draize test.
PAGE 5
compliance. Arrange disposal in accordance to the EPA and/or state and local guidelines. SECTION 14 : TRANSPORT INFORMATION DOT Shipping Name: Not Regulated. DOT UN Number: Not Regulated. SECTION 15 : REGULATORY INFORMATION Dipropylene glycol butoxy ether : TSCA Inventory Status: Listed Canada DSL: Listed Carbon black, amorphous : TSCA Inventory Status: Listed State Regulations: Listed in the New Jersey State Right to Know List. Listed in the Pennsylvania State Hazardous Substances List.
PAGE 6
MSDS Revision Date: October 15, 2013 MSDS Author: Actio Corporation Disclaimer: This Health and Safety Information is correct to the best of our knowledge and belief at the date of its publication but we cannot accept liability for any loss, injury or damage which may result from its use.