MSDS

ManualsBrandsBEHR ManualsPaint1 gal. White Semi-Gloss Direct to Metal Interior/Exterior Paint

View (M)SDS Section :

SECTION 1 : PRODUCT AND COMPANY IDENTIFICATION

Product Name:

BEHR™ Int/Ext Direct-To-Metal Semi-Gloss Paint - White Base

Product Code:

3200

MSDS Manufacturer Number:

3200

Manufacturer Name:

BEHR Process Corporation

Address:

3400 W. Segerstrom Avenue

Santa Ana, CA 92704

General Phone Number:

(714) 545-7101

General Fax Number:

(714) 241-1002

Customer Service Phone

Number:

(800) 854-0133 ext. 2

CHEMTREC:

For emergencies in the US, call CHEMTREC: 800-424-9300

Canutec:

In Canada, call CANUTEC: (613) 996-6666 (call collect)

MSDS Creation Date:

July 08, 2013

MSDS Revision Date:

October 15, 2013

(M)SDS Format:

According to ANSI Z400.1-2004

NFPA

1 0

HMIS

Health Hazard

Fire Hazard

Reactivity

Personal

Protection

SECTION 2 : COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name

CAS#

Ingredient Percent

Amorphous silica

7631-86-9

1 - 5 by weight

Nepheline Syenite

37244-96-5

1 - 5 by weight

Aluminum hydroxide

21645-51-2

1 - 5 by weight

Titanium dioxide

13463-67-7

10 - 30 by weight

Dipropylene glycol butoxy ether

29911-28-2

1 - 5 by weight

SECTION 3 : HAZARDS IDENTIFICATION

Emergency Overview:

Irritant.

Potential Health Effects:

Eye:

May cause irritation.

Summary of content (6 pages)

PAGE 1
View (M)SDS Section : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SECTION 1 : PRODUCT AND COMPANY IDENTIFICATION Product Name: BEHR™ Int/Ext Direct-To-Metal Semi-Gloss Paint - White Base Product Code: 3200 MSDS Manufacturer Number: 3200 Manufacturer Name: BEHR Process Corporation Address: 3400 W. Segerstrom Avenue Santa Ana, CA 92704 General Phone Number: (714) 545-7101 General Fax Number: (714) 241-1002 Customer Service Phone Number: (800) 854-0133 ext.
PAGE 2
Skin: May cause irritation. Inhalation: Prolonged or excessive inhalation may cause respiratory tract irritation. Ingestion: May be harmful if swallowed. May cause vomiting. Chronic Health Effects: Prolonged or repeated contact may cause skin irritation. Signs/Symptoms: Overexposure may cause headaches and dizziness. Target Organs: Eyes. Skin. Respiratory system. Digestive system. Aggravation of Pre-Existing Conditions: None generally recognized.
PAGE 3
Spill Cleanup Measures: Absorb spill with inert material (e.g., dry sand or earth), then place in a chemical waste container. Provide ventilation. Clean up spills immediately observing precautions in the protective equipment section. SECTION 7 : HANDLING and STORAGE Handling: Use with adequate ventilation. Avoid breathing vapor and contact with eyes, skin and clothing. Storage: Store in a cool, dry, well ventilated area away from sources of heat, combustible materials, and incompatible substances.
PAGE 4
Molecular Formula: Mixture Molecular Weight: Mixture Flash Point: No Data VOC Content: Material VOC: 40 gm/l (Includes Water) Coating VOC.: 99 gm/l (Excludes Water) SECTION 10 : STABILITY and REACTIVITY Chemical Stability: Stable under normal temperatures and pressures. Hazardous Polymerization: Not reported. Conditions to Avoid: Heat, flames, incompatible materials, and freezing or temperatures below 32 deg. F. Incompatible Materials: Oxidizing agents. Strong acids and alkalis.
PAGE 5
SECTION 12 : ECOLOGICAL INFORMATION Ecotoxicity: No ecotoxicity data was found for the product. Environmental Fate: No environmental information found for this product. SECTION 13 : DISPOSAL CONSIDERATIONS Waste Disposal: Consult with the US EPA Guidelines listed in 40 CFR Part 261.3 for the classifications of hazardous waste prior to disposal. Furthermore, consult with your state and local waste requirements or guidelines, if applicable, to ensure compliance.
PAGE 6
TSCA Inventory Status: Listed State Regulations: Listed in the New Jersey State Right to Know List. Listed in the Pennsylvania State Hazardous Substances List.