Data Sheet MYTHINGSTM Rapid Prototyping Module www.behrtech.
MYTHINGS Rapid Prototyping Module Datasheet Overview The MYTHINGS Module (UNI) is a pre-configured rapid prototyping RF module featuring sub-GHz communication according to the ETSI TS 103 357 (TS UNB) specification by BehrTech for robust and scalable Low Power Wide Area Networks (LPWAN). The module features a small footprint breakout board based on the TDNEXT module that enables rapidly prototyping for your IoT project design, integrating with the MYTHINGS network.
Features On-board Modules Industrial, manufacturing, smart buildings, mining, and similar applications that require simple and reliable networking solutions. TD Next TD1207 (Europe) / TD1508 (North America) Interface UART (AT Command Set) Input Voltage 5V Module Size 50 mm x 25.22 mm (1.97 in x 0.
Pinout Diagram This table displays the pinouts on the MYTHINGS Rapid Prototyping Module and how they correspond to the pinout on the mikroBUS™ socket (the latter in bold in the two middle columns).
Radio Specifications The radio specification, Telegram Splitting Ultra Narrow Band (TS-UNB) is based on the ETSI TS 103 357 standard. Radio Specifications Region Parameters Values Europe North America Tx Power 14 dBm Operating Frequency Range 863-870 MHz Channels Dual Channel Channel Bandwidth 750 KHz Channel Centre Frequency (Channel A) 867.825 MHz Channel Centre Frequency (Channel A) 866.9 MHz Tx Power 24 dBm Operating Frequency Range 915.2–916.
Note: the EUI information in the QR tag includes \r\n to indicate a new line. When adding a new node into MYTHINGS Central, do not copy the \r\n as part of the EUI. Also, be aware that the QR tag does not include the Node Type. You must add this separately. RF Exposure Requirements To comply with FCC RF exposure compliance requirements, the device must be installed to provide a separation distance of at least 20 cm from all persons.
Regulatory Notes This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC ID:2ATF6-MY-UNIMODNA") for the United States of America and (“Contains IC: 25059MYUNIMODNA”) for Canada. Manual Information for OEM integrator The following RF exposure info shall be supplied in end-users manual depends on the application. For mobile configuration of RF Exposure Information: IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.
MYTHINGS Rapid Prototyping Module Datasheet ©BehrTech 2020 Version 1.
M GS HI N T Y by BehrTech BehrTech www.behrtech.
