SDS

ACGIH Biological Exposure Indices
ValueComponents Determinant Specimen Sampling Time
0.15 g/g Sum of
mandelic acid
and
phenylglyoxylic
acid
Creatinine in
urine
*
Ethylbenzene (CAS
100-41-4)
2 mg/l MEK Urine
*
Methyl ethyl ketone (CAS
78-93-3)
* - For sampling details, please see the source document.
Exposure guidelines
US - California OELs: Skin designation
2-Methoxy-1-methylethyl acetate (CAS 108-65-6) Can be absorbed through the skin.
Good general ventilation should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Provide eyewash station and safety
shower.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles).
Eye/face protection
Skin protection
Wear appropriate chemical resistant gloves.
Hand protection
Skin protection
Wear appropriate chemical resistant clothing.
Other
If airborne concentrations are above the applicable exposure limits, use NIOSH approved
respiratory protection. Chemical respirator with organic vapor cartridge and full facepiece. Use a
positive-pressure air-supplied respirator if there is any potential for an uncontrolled release,
exposure levels are not known, or any other circumstances where air-purifying respirators may not
provide adequate protection.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
Observe any medical surveillance requirements. When using do not smoke. Always observe good
personal hygiene measures, such as washing after handling the material and before eating,
drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove
contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Aerosol.
Form
Copper.
Color
Solvent odor.
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
Not available.
Initial boiling point and boiling
range
Not available.
Flash point
-
156 °F (-104.44 °C)
Evaporation rate
Not available.
Not applicable.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
Not available.
Vapor density
Not available.
BEHR PREMIUM™ Aerosol - Hammered Copper - Gloss SDS US
962724 Version #: 01 Revision date: - Issue date: 03-August-2022
5 / 11