TDS

TECHNICAL DATA SHEETTECHNICAL DATA SHEET
GENERAL INFORMATION:
DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR.
VAPORS MAY CAUSE FLASH FIRE. VAPOR HARMFUL.
CAUSES SERIOUS EYE DAMAGE. IRRITATES SKIN AND
RESPIRATORY TRACT. VENTILATION REQUIRED: To avoid
inhalation and combustion hazards (see below), DO NOT
use this product unless you can achieve cross ventilation by
opening windows and doors during application and drying.
MAY CONTAIN: ACETONE, BUTYL ACETATE, PROPANE,
ISOBUTANE, N-BUTANE, 1-METHOXY-2-PROPANOL
ACETATE, CALCIUM CARBONATE, METHYL ETHYL
KETONE, 3-ETHOXYPROPIONIC ACID ETHYL ESTER,
ALUMINUM, HYDROTREATED LIGHT DISTILLATES,
STODDARD SOLVENT, ALIPHATIC PETROLEUM
DISTILLATES, LIGHT AROM. SOLVENT NAPHTHA
(PETROLEUM), HEAVY HYDROTEATED NAPHTHA
(PETROLEUM), COBALT CARBOXYLATE, ZIRCONIUM
CARBOXYLATE, CARBON BLACK AND CRYSTALLINE
SILICA. May aect the brain or nervous system causing
dizziness, headache or nausea. CAUSES SERIOUS EYE
DAMAGE. IRRITATES SKIN, NOSE AND THROAT. Do
not breathe vapors or spray mist. If you experience eye
watering, headaches or dizziness, increase fresh air, wear
respiratory protection (NIOSH/MSHA TC 23C or equivalent)
or leave the area. VAPORS MAY IGNITE EXPLOSIVELY. Do
not spray near sparks, heat or open ame. Do not smoke.
Vapors are heavier than air and can travel at oor level to
distant ignition sources. Extinguish all ames and pilot
lights and turn o stoves, heaters, electric motors, high
intensity lights and other sources of ignition during use and
until all vapors are gone. WARNING-CONTENTS UNDER
PRESSURE. Do not puncture or incinerate container. Do
not expose to heat or store at elevated temperatures above
120°F. Prolonged exposure to sun may cause bursting.
First Aid: If you experience diculty breathing, leave
the area to obtain fresh air. If diculty continues,get
medical attention immediately. If swallowed, call
physician immediately. In case of eye contact,
ush immediately with plenty of water for at least
15 minutes and get medical attention. For skin
contact, wash thoroughly with soap and water.
KEEP OUT OF REACH OF CHILDREN.
This information is provided “as is” and no representations or warranties, either express or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a Behr Paint Company representative,
call 1-800-854-0133 Ext. 2 (U.S.A. only) or visit behr.com. ©2022 Behr Process Corporation, Santa Ana, CA 92705 U.S.A.
Revised 11/2022
2 of 2
BEHR PREMIUM™ AEROSOL
METALLIC, HAMMERED, AND TEXTURED FINISHES