SDS

Skin protection
Wear appropriate chemical resistant gloves.
Hand protection
Skin protection
Wear appropriate chemical resistant clothing.
Other
If airborne concentrations are above the applicable exposure limits, use NIOSH approved
respiratory protection. Chemical respirator with organic vapor cartridge and full facepiece. Use a
positive-pressure air-supplied respirator if there is any potential for an uncontrolled release,
exposure levels are not known, or any other circumstances where air-purifying respirators may not
provide adequate protection.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Aerosol.
Form
Copper.
Color
Solvent.
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
Not available.
Initial boiling point and boiling
range
Not available.
Flash point
-156 °F (-104.44 °C)
Evaporation rate
Not available.
Not applicable.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Explosive limit - lower (%)
Not available.
Explosive limit - upper (%)
Not available.
Vapor pressure
Not available.
Vapor density
Not available.
Relative density
Not available.
Solubility(ies)
Solubility (water)
Not available.
Partition coefficient
(n-octanol/water)
Not available.
Auto-ignition temperature
Not available.
Decomposition temperature
Not available.
Viscosity
Not available.
Other information
Density
6.56 lbs/gal
Not explosive.
Explosive properties
Not oxidizing.
Oxidizing properties
10. Stability and reactivity
The product is stable and non-reactive under normal conditions of use, storage and transport.
Reactivity
Material is stable under normal conditions.
Chemical stability
No dangerous reaction known under conditions of normal use.
Possibility of hazardous
reactions
Heat. Avoid temperatures exceeding the flash point. Contact with incompatible materials.
Conditions to avoid
Strong oxidizing agents.
Incompatible materials
BEHR PREMIUM™ Aerosol - Metallic Copper - Gloss SDS US
959072 Version #: 01 Revision date: - Issue date: 15-September-2022
5 / 10