TDS

TECHNICAL DATA SHEETTECHNICAL DATA SHEET
BEHR PREMIUM™ AEROSOL
PRODUCT INFORMATION
BEHR PREMIUM™ Aerosol features an enhanced formulation that combines paint and primer
†
in a single can, delivering a
premium, durable finish. Designed for both indoor and outdoor use, BEHR PREMIUM™ Aerosol can be used on wood, metal, cast
stone and wicker. Weather and corrosion resistant, it delivers a reliable, long-lasting nish. The unique, ergonomic shape of the
BEHR PREMIUM™ Aerosol can and its comfort tip deliver a superior spray experience that ghts fatigue so you can create a smooth
nish every time.
†
A primer coat may be needed on some surfaces.
RECOMMENDED USES:
Ideal for use on properly prepared surfaces such as:
• Wood • Metal • Plastic • Cast Stone • Wicker
CONTAINER CAP PROVIDES CLOSE APPROXIMATION OF COLOR AND SHEEN OF THE PRODUCT.
PRODUCT SPECIFICATIONS:
Colors:
B000144 Black Gloss
B000244 Orion Gray Gloss
B000344 Lunar Surface Gloss
B000444 Hidden Sea Glass Gloss
B000544 Inked Gloss
B000644 Blazing Bonre Gloss
B000744 Baronial Brown Gloss
B000844 No More Drama Gloss
B000944 Flirt Alert Gloss
B001044 Unmellow Yellow Gloss
B001144 Luck of the Irish Gloss
B001244 Congo Gloss
B001444 Tropics Gloss
B001544 Mayan Treasure Gloss
B001644 Sugar Beet Gloss
B001744 Outdoor Café
B001844 Khaki Shade Gloss
B001944 White Gloss
B002044 White Matte
B002144 Black Matte
B002244 Lunar Surface Flat
B002344 Clear Flat
B002944 Iron Mountain Satin
B003744 Wild Manzanita Gloss
B004744 White Primer
B004944 Gray Primer
B005044 O White 73
B005744 Roasted Corn Gloss
B006144 Beyond Navy Flat
B006244 Adored Blue Gloss
B006344 Dark True Flat
B006844 Black Satin
B006944 White Satin
B007044 Breezeway Satin
B007144 Toasty Gray Gloss
B007244 Deep Espresso Satin
B007744 Hopeful Dream Satin
B008444 Black Evergreen Satin
B008544 Matcha Gloss
Finish:
Flat: < 5 @ 60
Gloss: > 80 @ 60
Sheen level depends on porosity of surface and various
surface irregularities.
Resin Type: Modied Alkyd
Net Weight: 12 oz / 340 g
*% Solids by Volume: 17% ± 3%
*% Solids by Weight: 28% ± 3%
Max Product-Weighted MIR:
Flat: 0.80
Non-Flat: 0.95
Primer: 0.70
Coverage: Up to 15 sq ft per can, depending on the surface
texture, porosity and application method. Does not include
the loss of material from spraying.
SURFACE PREPARATION:
• The surface must be clean, free of dust, grease, wax,
peeling paint, mold and mildew. If washing is necessary,
use a non-soapy detergent or a TSP substitute. Rinse well
and allow to dry.
• Scrape o loose paint and sand to a smooth surface.
• For maximum adhesion, sand glossy surfaces thoroughly
before coating.
Stain-Blocking:
• If stain-blocking performance is required, apply a coat of
primer such as KILZ® ORIGINAL Interior/Exterior Oil-Based
Aerosol Primer No. 1008.
WARNING! If you scrape, sand or remove old paint, you may
release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN
CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY
IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH-approved respirator to control
lead exposure. Clean up carefully with a HEPA vacuum and a
wet mop. Before you start, nd out how to protect yourself
and your family by contacting the National Lead Information
Center at 1-800-424-LEAD or log on to www.epa.gov/lead.
APPLICATION:
• Shake can vigorously for 1 minute after mixing ball begins
to rattle and often during use.
• Test your spray application technique on a scrap surface or
inconspicuous area before starting the project.
• Hold can upright, moving from side-to-side while spraying
lightly and evenly about 12” from area being painted.
Always start and nish spraying o the object. Each spray
pass should overlap the previous pass by half.
• Apply multiple thin coats to prevent dripping and sagging.
Allow to dry between each coat.
Dry Time: @ 77°F & 50% RH:
To Touch: 15 minutes
Re-coat: Before 1 hour or after 24 hours
Dry times are temperature, humidity, and lm thickness
dependent
CLEANUP/DISPOSAL:
• Clear spray valve immediately after use by turning can
upside down and spraying until only clear gas is released.
If spray nozzle becomes clogged, remove and clean with
paint thinner or mineral spirits where allowed.
• Do not stick pins or wire into spray nozzle opening.
• Clean fresh overspray with VOC-compliant paint thinner
or mineral spirits. Otherwise use acetone. Remove dried
paint with paint remover, but test small area rst to ensure
paint remover does not damage substrate.
• Wipe o tip before storing.
• Do not burn or place in home trash compactor.
• For recycling or disposal information, contact your
household refuse collection service.
This information is provided “as is” and no representations or warranties, either express or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For SDS or to consult with a Behr Paint Company representative,
call 1-800-854-0133 Ext. 2 (U.S.A. only). ©2021 Behr Process Corporation, Santa Ana, CA 92705 U.S.A.
*Values given here are from BEHR PREMIUM™ Aerosol Gloss White.
Revised 10/2022
1 of 2