View (M)SDS Section : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION Product Name: Premium Plus® Exterior Satin Enamel Deep Base No. 9340 Product Code: 9340 MSDS Manufacturer Number: 9340 Manufacturer Name: BEHR Process Corporation Address: 3400 W. Segerstrom Avenue Santa Ana, CA 92704 Health Hazard 1 General Phone Number: (714) 545-7101 Fire Hazard 1 General Fax Number: (714) 241-1002 Customer Service Phone Number: (800) 854-0133 ext.
Inhalation: Prolonged or excessive inhalation may cause respiratory tract irritation. Ingestion: May be harmful if swallowed. May cause vomiting. Chronic Health Effects: Prolonged or repeated contact may cause skin irritation. Signs/Symptoms: Overexposure may cause headaches and dizziness. Target Organs: Eyes. Skin. Respiratory system. Digestive system. Aggravation of Pre-Existing Conditions: None generally recognized.
Personnel Precautions: Use proper personal protective equipment as listed in section 8. Environmental Precautions: Avoid runoff into storm sewers, ditches, and waterways. Spill Cleanup Measures: Absorb spill with inert material (e.g., dry sand or earth), then place in a chemical waste container. Provide ventilation. Clean up spills immediately observing precautions in the protective equipment section. SECTION 7 - HANDLING and STORAGE Handling: Use with adequate ventilation.
Physical State Appearance: Liquid. Boiling Point: No Data Melting Point: No Data Density: 8 - 10 Lbs./gal. Vapor Density: Greater than 1 (Air = 1). pH: 8.5 to 9.5 Molecular Formula: Mixture Molecular Weight: Mixture Flash Point: No Data VOC Content: Material VOC: 18 gm/l (Includes Water) Coating VOC.: 50 gm/l (Excludes Water) The addition of colorant may add VOCs. SECTION 10 - STABILITY and REACTIVITY Chemical Stability: Stable under normal temperatures and pressures.
SECTION 13 - DISPOSAL CONSIDERATIONS Waste Disposal: Consult with the US EPA Guidelines listed in 40 CFR Part 261.3 for the classifications of hazardous waste prior to disposal. Furthermore, consult with your state and local waste requirements or guidelines, if applicable, to ensure compliance. Arrange disposal in accordance to the EPA and/or state and local guidelines.
is designed only as a guidance for safe handling, storage and the use of the substance. It is not a specification nor does it guarantee any specific properties. All chemicals should be handled only by competent personnel, within a controlled environment. Should further information be required, this can be obtained through the sales office whose address is at the top of this data sheet.
