TDS
TECHNICAL DATA SHEET
This information is provided "as is" and no representations or warranties, either expressed or implied, of merchantability, tness for a particular purpose or of any other
nature are made with respect to this information or to any product referred to in this information. For MSDS or to consult with a Behr Certied Coatings Professional,
call 1-800-854-0133 Ext. 2 (U.S.A. only). ©2017 Behr Process Corporation Santa Ana, CA 92704 U.S.A.
*For as long as you reside in your home. See label for details.
Revised 1/2017
2 of 2
Metal: Remove all rust and mill scale using sandpaper, steel
wool, abrasive blasting, or other abrading methods to create
a prole on the metal’s surface. New Surfaces: Clean the
metal by scrubbing the surface with a detergent and water
solution, followed by a thorough rinsing with clean water.
Bare metal must be primed the same day it is cleaned.
WARNING! If you scrape, sand or remove old paint,
you may release lead dust. LEAD IS TOXIC. Contact the
National Lead Information Center at 1-800-424-LEAD or
visit www.epa.gov/lead.
RECOMMENDED PRIMER/SYSTEMS:
PROPERLY PREPARED NEW SURFACES:
Drywall:
1st Coat: BEHR PREMIUM PLUS® Interior Drywall Primer
& Sealer No. 73
2nd Coat: BEHR PREMIUM PLUS Interior Ceiling Paint
Plaster:
1st Coat: BEHR PREMIUM PLUS All-In-One Primer
& Sealer No. 75
2nd Coat: Behr Premium Plus Interior Ceiling Paint
Wood:
1st Coat: BEHR PREMIUM PLUS All-In-One Primer
& Sealer No. 75
2nd Coat: BEHR PREMIUM PLUS Interior Ceiling Paint
Tannin/Stainblocking:
1st Coat: BEHR PREMIUM PLUS All-In-One Primer
& Sealer No. 75
2nd Coat: BEHR PREMIUM PLUS Interior Ceiling Paint
CLEAN UP:
Clean all tools and equipment with clean water. For disposal
of empty containers and unused product, contact your
household refuse collection service.
CAUTIONS/LIMITATIONS:
• Protect from freezing.
• Do not use on oors.
• For best results, apply at temperatures between
50°F - 90°F. Temperatures above 90°F may aect the
application such as drying too fast. Avoid painting in
direct sun. NOTE: If the surface is hot to the touch it
should be considered too hot to apply this coating.
• Allow four weeks before washing or cleaning for full cure.
• Shelf life under normal conditions is two years unopened.
GENERAL INFORMATION:
Warning! Causes eye and skin irritation. Wear protective
clothing, gloves, eye, and face protection. Do not eat, drink,
or smoke when using this product. Take o contaminated
clothing and wash it before reuse. Wash hands thoroughly
after handling. Dispose of unused contents, container and
other contaminated wastes in accordance with local, state,
federal and provincial regulations.
First aid: If in eyes: Rinse cautiously with water for
several minutes and remove contacts if present and easy
to do. Continue rinsing and get medical attention if eye
irritation persists. If on skin: Wash with plenty of soap
and water. If swallowed: Rinse mouth and get medical
attention if you feel unwell.
INTERIOR CEILING FLAT PAINT
NO. 558 ULTRA PURE WHITE®