Owner manual

Optional Wire Mesh Top for 5’ x 10’ Dog Kennel 38140017
Optional Wire Mesh Top for 10’ x 10’ Dog Kennel 38140027
• For proper setup, have the wire facing the
outside of the kennel. For tops to fit properly,
dog kennels must be set up as shown.
• Each top panel will have to be attached by using
the butterfly clamps supplied.
• To attach the clamp, one side of the clamp will
have to be inserted between the wire and the
vertical tube before the other side of the clamp
can be attached. A clamp should be attached at
each location shown in the diagram.
PARTS LISTING
PART NO.
ITEM DESCRIPTION PAINTED PLATED 10x10 QTY 5x10 QTY
1 Bolt, Carriage 3/8” x 1” ZP 1328327 12 4
2 1-5/8” Butterfly Connector 38600407 38600409 24 8
3 High Wing Nut 3/8” 2688306 12 4
4 Wire Mesh Top 38400197 2 1
5 10 x 10 Dog Kennel -- 1 --
6 Kennel Top Center Brace 38600397 1 --
7 5 x 10 Dog Kennel -- -- 1
4
7
5
F-19030E Rev. 11-4-03 4-1-99
3
2
1
6
NOTE: Wire Mesh Tops are an optional accessory and come in gray powder coat only.