Smart Sonic Electric Toothbrush User Manual Product name：Electric Toothbrush Product model：W1 Exporter company： Beheart Technology Nanjing Co., LTD/Room 1004, Building E08-2, Suning Huigu, No . 268,Jiqingmen Street, Gulou District, Nanjing,jiangsu province,China; Fel：025-58766939 Fax：025-58766939 Manufacturer： Beheart Technology Nanjing Co., LTD/Room 1004, Building E08-2, Suning Huigu, No .
Safety instructions In the first day of using this electric toothbrush, your gums may bleed slightly, because the gums are not used to this efficient cleaning. In general, bleeding should stop within 1 to 2 weeks. If more than two weeks, you should stop using this toothbrush and consult your dentist. Attention ·Please check if the product has obvious damage on before using; If the product is dropped or destroyed badly, please don’ t use it.
Warning ·If you are undergoing treatment for any oral care condition, consult your dental professional prior to use. ·This product complies with safety standards for electromagnetic devices. Please consult your doctor or implantable device manufacturer about the questions of pacemakers or other implantable devices before using it. ·This product is only designed for cleaning teeth, gums and tongue. Do not use it for any other purposes.
Product introduction ① Screen ② On/Off/Pause ④ Charging Port ③ Brush Head ⑤ Power Cord * The user interface and other illustrations of the product accessories in the manual are schematic diagrams for reference only. Due to the update and upgrade of the product, the actual product may be slightly different from the schematic diagram, please take the actual product as the standard.
First Time Use The toothbrush will wake up by pressing the ON/OFF button for the first time on a brand-new toothbrush. The bluetooth function will be activated and remain on. After installing "Beheart" App, please complete the prompts to complete the connection and settings for the toothbrush; Install APP You can installing "Beheart" App from App market. After installing, please search and conncet the toothbrush. *Tips: The connection in the mobile phone "System Settings-Bluetooth Settings" is invalid.
Power On Pick up the toothbrush or short press both can turn on the toothbrush(for the first time you need to press the button for 1.5s to turn it on), time will be displayed on the screen, click to enter the initial interface; If there is no action within 20s after the screen is turned on, the toothbrush will automatically shut down. Switching Mode You can press and hold the button for 1 second to switch mode before toothbrush running and short press to run the selected mode.
Brushing Modes ①Standard Mode： Two-minutes brushing with normal strength,reminding of changing areas each 30 seconds, it offers the feedback after two-minutes brushing. The feedback icon will last for 5 seconds before the standby mode. ②Whitening Mode： Brushing for two minutes with polishing and cleaning modes, reminding of changing areas each 30 seconds, it offers the feedback after two-minutes brushing.The feedback icon will last for 5 seconds before the standby mode.
Icon Introduction power display current mode countdown mode selection Selecting Interface (running state) Using Interface Brush Head Replacement Reminder * After connecting to the App, when the electric toothbrush has been used for more than 90 days, the App will actively remind the brush head to be replaced.
Using tips ①There will be 3s-strength’ s change from weak to strong when starting to prevents toothpaste splashing. ②During the process of brushing, there will be a short pause 30 seconds intervals to remind you to move to the next quadrant of your mouth. When brushing for 2 minutes, the toothbrush will automatically stop working, and the icon of the tooth area will be displayed on the screen to remind you whether the cleaning area is comprehensive or not.
Change Brush Head Make sure that the direction of the bristles of the toothbrush head is consistent with the front direction of the toothbrush handle, and install the brush head vertically downwards on the handle, and ensure that there is a certain gap of 0.5-0.8mm between the two components (to avoid the collision of the toothbrush head with the handle in high-frequency vibration); Do not install the brush head by twisting vigorously.(otherwise, the brush head and body may be damaged.) 0.5-0.
Basic parameters Product name：BEHEART Smart Sonic Electric Toothbrush White Key W2 Product model：W1 Rated voltage：3.3V Rated power: 1.5W Input parameter: 5V 1.0A Charging time: 150min Waterproof grade: IPX 7 Products information: Made in China Manufacturer: Beheart Technology Nanjing Co., LTD Address: Room 1004, Building E08-2, Suning Huigu, No. 268, Jiqingmen Street, Gulou District, Nanjing Executive standard: GB 4706.1-2005, GB 4706.
Eliminate Problem Problem It doesn’ t work Brush head can’ t match handle The vibration of brush head is weak Possible reason Under the protection of charging Remedy Cut off the power Battery has a very low charge level Charge the toothbrush There are something on the power shaft Clean the power shaft Brush head doesn’ t install well Install brush head again There are something in the brush head jack Not the genuine brush head There are something between brush head and handle Get something ou
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
