M961U Presenter Mouse Quick Guide Version 1.
FCC GUIDELINES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
Presenter Mouse Table of Contents Product Description ................................................. 3 System Requirements .............................................. 4 Presenter Mouse Hotkey Functions......................... 7 Hardware Installation ............................................... 8 ID Pairing Procedure .............................................. 11 Product Information ............................................... 13 Troubleshooting...............................................
Wireless Presenter Mouse CAUTION ¨ Ø Laser Pointer Hazards Keep away from children, infants and juveniles. This laser pointer is not a toy. This laser pointer should only be used under responsible adult supervision. Ø NEVER point or project this laser pointer at any part of the body (ESPECIALLY THE EYES) of a person or animal. This laser pointer is intended to point out or emphasize inanimate objects only. Ø Do not stare at the laser beam directly to prevent serious damage to the eyes.
Wireless Presenter Mouse Product Description The 2.4 GHz wireless Presenter Mouse is with multi-function: Wireless Mouse, Laser Pointer and Microsoft® PowerPoint® Presentation control. It can operate out of the box immediately; no software is required for your Windows-based PC. The Presenter Mouse has an operating range up to 15m or 49 feet from the receiver. The presenter mouse uses 2pcs standard UM-4 (AAA) 1.5V alkaline batteries. The battery life is up to 3 months; depending on the intensity of usage.
Wireless Presenter Mouse System Requirements ¨ ¨ Available USB port Microsoft® Windows® 98SE, Windows® ME, Windows® 2000 and Windows® XP operating systems ¨ CD-ROM drive (for CD or Video operation) ¨ Standard sound card (for CD or Video operation) ¨ Microsoftâ Office 97 or later version 4
Wireless Presenter Mouse 5
Wireless Presenter Mouse 6
Wireless Presenter Mouse Presenter Mouse Hotkey Functions 1. Power Slide Switch: Power On/ Off button Press 3 seconds to off. 2. Mouse Left Button 3. Mouse Right Button 4. Mouse Cursor Control Button: Mouse cursor 5. Laser Pointer Button: Press to shoot the laser beam 6. Previous Slide: Skips backward to the previous slide (PowerPoint). 7. Next Slide: Skips forward to the next slide (PowerPoint). 8. Presentation Start/ Stop Button: Display/ Stop the PowerPoint presentation. 9.
Wireless Presenter Mouse Hardware Installation 1. Plug the dongle receiver connector into your USB port on the PC. During the initial installation, the system will automatically detect that a new hardware device has been added and will bring up an installation dialogue box. Please follow the on-screen instructions to complete the installation steps. Front view of USB connector Back view of USB connector 2.
Wireless Presenter Mouse 3. Before using the presenter, please make sure the power slide switch on the left side is switched to “on”. When not in use, please turn the power slide switch to “off” for power saving. 4. The wireless presenter mouse can operate out of the box immediately after you first plug the dongle receiver’s USB connector into your PC USB port.
Wireless Presenter Mouse 10
Wireless Presenter Mouse ID Pairing Procedure If the presenter mouse fails to work, please follow the steps below to initiate the wireless presenter mouse ID pairing process. 1. 2. First, press the ID pairing/connect button on the top of the dongle receiver first at least 5 seconds until the receiver LED flashes 3 times. The receiver LED will flash 60 seconds to wait for presenter mouse pairing information. (If you release the button within 5 seconds, the ID doesn’t make any changes.
Wireless Presenter Mouse ID pairing/ connect button on the bottom of the presenter mouse Note: - The whole procedure should be completed within 60 seconds. - Make sure your PC is on and running when doing the ID pairing procedure. - After changing batteries, you do not have to pair ID again. If the presenter mouse fails to work, please follow the steps above to initiate the ID pairing process.
Wireless Presenter Mouse Product Information Ø Battery Information: 1. We recommend using alkaline batteries for a longer battery life. 2. Always change batteries when battery low alarm appears, otherwise the presenter mouse will shut down once the battery voltage is too low. 3. Don't mix different types of batteries or new and old batteries together. Always replace old batteries with new and same type batteries. 4. Remove batteries after long periods of non-use.
Wireless Presenter Mouse Ø Battery Low Alarm: When the presenter mouse batteries are low, the LED indicator on the top of the presenter mouse will flash once when you press presenter mouse buttons. Please change batteries immediately when the RED LED indicator lights up. After you change the batteries, the RED LED indicator will disappear.
Wireless Presenter Mouse Troubleshooting If you are experiencing problems with your presenter mouse, please check the following: 1. Symptom: The wireless presenter mouse does not work properly Solution: If the wireless presenter mouse does not work properly, use the following steps to check your wireless presenter mouse: (1) Unplug the receiver and plug it back into your PC’s USB port. (2) Next, please check if the batteries in the presenter mouse are installed correctly.
Wireless Presenter Mouse 2. Symptom: The presenter mouse exhibits a short wireless range Cause: Permanent RF signal reduction either by - noise from RFI source e.g. CRT/LCD monitors - metal desk or other metal object near presenter mouse or receiver Solution: Relocate the receiver. If the above troubleshooting suggestions still do not solve your problem, then please refer to your direct dealer for technical support.
3100507111 Version 1.
