User's Manual

9
ID Setting
This wireless keyboard kits contains 2 channels, and each channel
contains 256 sets ID. This extra ID-recognition function helps to protect
against interference from other RF keyboards in the same environment.
After completing the hardware installation you must set the ID of the
receiver, mouse and keyboard.
Step 1: Press the ID button on the top of the receiver once.
ID Button
Step 2: Press the ID button on the bottom of the mouse once.
utton
Step 3: Press the ID button on the bottom of the keyboard once.
ID Button
CH1
CH2
Remarks:
1. You must follow the procedure above to set the ID of receiver, mouse
and keyboard. Once the receiver ID button is pressed you have 35
seconds to complete the entire process, or you will need to begin
ID Button of Receiver
ID Button of Mouse
ID Button of Keyboard