User's Manual

9129URFⅢ

’

Hardware Installation

Step 1: Make sure your PC is switched off.

Step 2: Connect the receiver to your PC by plugging in the receiver’s black

connector into the USB port of your PC .

Step 3: Take the keyboard and make sure the batteries on the back are installed

correctly. (Follow the polarity signs in the battery compartment.)

Remarks:

1. The keyboard uses 4 pcs. standard UM-3 (AA) 1.5V alkaline batteries.

2. Battery life is approximately 3-4 months, depending on the intensity of usage.

3. Make sure the receiver is placed in a location where is relatively free of strong

electromagnetic or transmission sources in order to ensure optimal reception of the

keyboard signal.

Bottom View of Keyboard

USB Plug

PAGE 1
9129URFⅢ Wireless Keyboard User’s Guide Hardware Installation Step 1: Make sure your PC is switched off. Step 2: Connect the receiver to your PC by plugging in the receiver’s black connector into the USB port of your PC . USB Plug Step 3: Take the keyboard and make sure the batteries on the back are installed correctly. (Follow the polarity signs in the battery compartment.) Bottom View of Keyboard Remarks: 1. The keyboard uses 4 pcs. standard UM-3 (AA) 1.5V alkaline batteries. 2.
PAGE 2
ID Setting This wireless keyboard kits have 255 sets ID in each unit. This extra ID-recognition function helps to protect against interference from other RF keyboards in the same environment. Ø The word CONNECT labels the ID button on each unit. Ø The LED under ID button of receiver shows connecting condition. Step 1: Press the ID button on the side of the receiver once. Step 2: Press the ID button on the bottom of the keyboard once. ID Button of Keyboard Remarks: 1.
PAGE 3
FCC GUIDELINES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications.