User Manual

7
2. Next, press the ID button on the top of the receiver once.
3. Then press the ID button on the bottom of the keyboard once.
Note: The whole procedure should be complete within 25 seconds.
Remarks:
1. You must follow the procedure above to set the ID. Once the receiver ID button is
pressed you have 25 seconds to complete the entire process, or you will need to begin
again.
2. When the receiver is plugged in, the LED under the receiver ID button will flash. Once the
ID is set, it will remain steadily lit.
3. When changing the batteries of keyboard or mouse, please proceed ID setting (mouse→
receiver or keyboard→receiver) again to ensure the usage of this keyboard kit.
ID Button on Receiver
(With a LED under)
Keyboard ID button