User's Manual

5
3 Hardware Installation
Step 1: Connect the receiver to your PC by plugging in the receiver’s USB connector
into your available USB port on PC.
Step 2: Take the keyboard and make sure the batteries on the back are installed
correctly. (Follow the polarity signs in the battery compartment.)
(+ )
(
-
)
1.5V 2pcs
Remarks:
1. The keyboard uses 2pcs standard UM-3 (AA) 1.5V alkaline batteries.
2. Battery life is approximately 3-4 months, depending on the intensity of usage.
3. Make sure the receiver is placed in a location relatively free of strong
electromagnetic or transmission sources in order to ensure optimal reception of
the keyboard signal.
Front View of USB Connector Back View of USB Connector