User's Manual

3 Hardware Installation

Slide Switch Setting

Step 1: Make sure your PC is switched off.

Step 2: Take the receiver and select channel CH1 or CH2 by using the

slide switch on the side of the receiver. (Remember your

selection.)

CH1

CH2

Step 3: Connect the receiver to your PC by plugging in the receiver’s USB

plug into your PC.

Step 4: Take the keyboard and make sure the batteries on the back are

installed correctly. (Follow the polarity signs in the battery

compartment.)

Back View of Receiver

Channel Switch of Receiver

Front View of Receiver Plug

Back View of Receiver Plug