封面內頁 封面內頁 9001BRF Wireless Keyboard & Mouse Kit User’s Guide Version 1.
The information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. No warranty of representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document and/or the products associated with it at any time without obligation to notify any person or organisation of such changes.
Table of Contents 1 Introduction.................................................................................................1 What's in this package ..............................................................................1 2 System Requirements ................................................................................3 3 Hardware Installation ................................................................................5 4 Software Installation .....................................
1 Introduction Congratulations on your purchase of this USB wireless RF keyboard and mouse! This keyboard and mouse will finally free you of the constraints of your desktop by providing a wireless connection between your keyboard/mouse and your PC.
2 Batteries (2 pcs of AA , and 2 pcs of AAA alkaline batteries)
2 System Requirements Microsoft Windows 98, Windows ME, Windows 2000 or Windows XP operating system Microsoft Internet Explorer 5.0 or later version (for the Internet keys) Standard sound card (for CD and Video operation) The system supporting ACPI or APM II (for power management buttons) ATX mother board and ATX power supply (for power management buttons) Please refer to table below for the other system requirements for the features.
Mouse Battery Low Function 4 Requires installation of keyboard driver (see driver disk for details) Requires installation of keyboard driver (see driver disk for details)
3 Hardware Installation Slide Switch Setting Step 1: Make sure your PC is switched off. Step 2: Take the receiver and select channel CH1 or CH2 by using the slide switch on the side of the receiver. (Remember your selection.) CH2 CH1 Back View of Receiver Channel Switch of Receiver Step 3: Connect the receiver to your PC by plugging in the receiver’s USB plug into your PC.
(-) Battery 1.
Step 5: Use the slide switch in the battery compartment of the keyboard to select the same channel as the one selected in step 2 on the receiver. Channel Switch & ID Setting of keyboard CH1 CH2 ID Button Step 6: Take the mouse and make sure the batteries on the back are installed correctly. (Follow the polarity signs in the battery compartment.
3. Make sure the receiver is placed in a location where is relatively free of strong electromagnetic or transmission sources in order to ensure optimal reception of the keyboard and mouse signal.
ID Setting This wireless keyboard kits contains 2 channels, and each channel contains 256 sets ID. This extra ID-recognition function helps to protect against interference from other RF keyboards in the same environment. After completing the hardware installation you must set the ID of the receiver, mouse and keyboard. Step 1: Press the ID button on the top of the receiver once. ID Button ID Button of Receiver Step 2: Press the ID button on the bottom of the mouse once.
again.
2. Once the keyboard and receiver are plugged in, the yellow receiver light will flash. Once the ID is set, it will remain steadily lit.. 3. When changing the batteries of keyboard or mouse, there is no need to reset all the ID’s. Simply reset one of them. 4. When keyboard batteries are low, a battery low icon the right-bottom corner of the Windows task bar. 5. When mouse batteries are low, a battery low icon right-bottom corner of the Windows task bar 6.
Figure 2 12
4 Software Installation After finishing the hardware installation as described in this manual and starting up your PC, you should be able to immediately take advantage of the wireless function of the wireless keyboard and mouse. If the keyboard and mouse are not working properly, see Chapter 6 Troubleshooting for tips on how to solve your problem. 4.
5 Using the Keyboard and Mouse 5.1 Using the Keyboard Besides the usual keys, this keyboard also has extra-dedicated keys, which provide the following ACPI, multimedia and Internet functionality: z ACPI Keys: Your keyboard has the power management keys that are Power off, Sleep, and Wake up three keys. They are also can be called ACPI (Advanced Configuration and Power Interface) keys.
z Multimedia Keys There is a row of multimedia keys on the top of keyboard. The functions are described as below: Help Display the help file on the screen. Shortcut Provide you to create an easy access to the documents and programs you use most often. The default setting for Shortcut button is to launch Windows accessory program “Notepad”. WWW Search Launch to your Internet Browser application and go to the Search Engine web site.
Play/Pause 16 When the CD or Video is playing, press this button to pause it, and press the button again to resume it from the current position.
Stop Stop the playing. Previous Skip backward to the previous file/track. Next Skip forward to the next file/trac. Eject Eject/ load the CD tray. 5.2 Using the Mouse After plugging the receiver in your computer and setting the mouse ID as described in chapter 3- Hardware Installation, you can take advantage of this wireless mouse immediately when you start up the computer.
6 Troubleshooting If you are experiencing problems with your keyboard or mouse please check the following: 1. Take out the receiver’s connector and check the receiver’s plug for possible broken pins. If the plugs appear normal then reinsert the plugs on your PC. 2. Check to see if the batteries in the keyboard and mouse are installed correctly. Make sure the polarity of the batteries corresponds with the polarity signs in the battery compartment. 3.
these cases please refrain from using any of the items before consulting with your dealer! If above troubleshooting suggestions still do not solve your problem then please refer to your direct dealer for technical support.
封底內頁 FCC GUIDELINES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
封底 3100505100 Version 1.
